CTS-PA322T TFM 3D imaging system Introduction
CTS-PA322T is a new Phased Array TFM Real-time 3D imaging system originally developed by Goworld, with 64 channels working together in parallel. The system collects FMC data from the object of either metal or non-metal and makes precise real-time 2D/3D TFM imaging through rapid hardware running based on FPGA. The innovative RF metadata platform can process the original signals on computer. Feature
By virtue of reconstructing algorithm model through rapid hardware running based on FPGA, the TFM images can be produced instantaneously, with a refresh rate of 50 frame per second.
Real time collecting original FMC data (64X64 A-scans) at the max depth up to 2m.
This system is applicable to wide-area TFM imaging inspection of aerospace composite materials, rail welds, locomotive wheel rims, wind turbine blade, bolts and thick-wall butt welds.
Based on the one-dimensional linear array probe, realize the 2D TFM imaging testing.
Based on the two-dimensional Matrix probe, realize the 3D TFM imaging testing.
Based on 2D TFM combined with encoder positioning, realize rapid C-scan imaging testing.
Based on two-dimensional matrix probe and wedge, realize 3D graphics display, combined with encoder can form an intuitive and transparent 4D testing image of the weld or others.
TFM solutions for welds, castings and forgings, and RT detection for medium thickness wall austenitic stainless steel welds are ideal alternatives.
3D-TFM combines with encoder to form a real-time 4D testing image. The scanning speed is over 100mm/s.
Customized TFM model can realize effective TFM testing of various abnormal materials such as PMMA spherical shell, ceramics and so on.
The system provides functions such as storage of FMC data, preservation of test results, quantitative analysis of defect location, etc. It can provide test reports according to the report format required by users. Technical parameter
Pulser
Voltage: Bipolar Square wave, 45V~100V, with 1.0V, 10.0V per step
Pulse width: 10 ～ 600ns, with 1.0ns, 10.0ns per step
Receiver
Bandwidth: 0.5 ～15MHz
Gain: 0~55dB , with 1.0dB, 10.0dB per step
Filter: Low, medium and high, 3 optional
DATA PROCESSING
Digitizing Rate: 62.5 MHz，10 bit
Input Impedance: 50Ω
In-Built Processor: Larger FPGA, big data real-time HW processing
Focal Laws(Qty)： 262144
Rx Delay: 0～40 μs，PRN up to 2.5ns
System
Channel Config: 64*64 total in parallel
Power Consumption: 50 W
Operation Platform: up to Windows 7
Signaling Rate: 100M/1000M Ethernet
Dimension: 410×120×280
Weight: 11Kg with battery
Input and output
PC:
USB3.0 port(Qty):4
HDMI
LAN network
RS232
VGA
PA:
I-PEX
LAN Network
I/O
USB2.0 port(Qty):2
ENCODER
CTS-PA322T is a new Phased Array TFM Real-time 3D imaging system originally developed by Goworld, with 64 channels working together in parallel. The system collects FMC data from the object of either metal or non-metal and makes precise real-time 2D/3D TFM imaging through rapid hardware running based on FPGA. The innovative RF metadata platform can process the original signals on computer.
