CTS-8072PR dual channel pulse transmitter and receiver Introduction: The CTS-8072PR dual channel pulse transmitter receiver is a specialized instrument used in high-frequency detection research. It has a low noise and broadband receiving amplification circuit, as well as a sharp wave transmission circuit composed of a high-performance sharp pulse generator and a high-voltage power supply. CTS-8072PR+provides dual channel data acquisition function and can achieve computer synchronization control. Provide negative voltage spike excitation pulse output and receiving amplifier. Features: 1. Pulse width of 7ns, amplitude of -150V to -300V. 2. The pulse repetition rate is optional, with a maximum repetition rate of 20kHz. The bandwidth of the receiver is 110MHz (-3dB). 4.60dB RF gain adjustment range, 1dB step. 5.20kHz or 20MHz optional high pass filter. 6. Provide RF signal output, synchronization signal output, external trigger input, USB and standard network interface. 7.500MHz sampling rate/12bit data acquisition module. 8. Computer synchronous control and display can provide users with secondary development packages. 9. We can provide our company's independently developed series of high-frequency probes such as 30MHz and 50MHz. Technical parameters: Pulse type: negative sharp wave Pulse descent and rise time: typical value<3ns, maximum value ≤ 3.5ns Pulse amplitude: -150V~-300V Damping: 4 levels available: 25 Ω, 33 Ω, 50 Ω, 100 Ω Pulse width: 7ns (@ 50 Ω damping) Mode: Single, Double Pulse repetition frequency: 100Hz, 200Hz,..., 19kHz, 20kHz, a total of 29 options available Synchronous pulse output: TTL level (output impedance 50 Ω) External trigger input: TTL level, pulse greater than 50ns Maximum bandwidth: 20kHz~110MHz Gain adjustment range: -6dB~54dB High pass filtering: 20kHz or 20MHz Low pass filtering: 110MHz Maximum signal output: ± 1.5Vp-p Input impedance: 50 Ω Output impedance: 50 Ω Input/output interfaces: T, R, RF output, external trigger Trig, synchronous output Sync Power supply: optional AC 220V or AC 110V, 50Hz~60Hz, factory standard configuration is AC 220V External dimensions: 305 mm × 230 mm × 105 mm; (Long) × wide × High Environmental temperature: 0-50 ℃ Weight: 5.0 kg
Introduction: The CTS-8072PR dual channel pulse transmitter receiver is a specialized instrument used in high-frequency detection research. It has a low noise and broadband receiving amplification circuit, as well as a sharp wave transmission circuit composed of a high-performance sharp pulse generator and a high-voltage power supply. CTS-8072PR+provides dual channel data acquisition function and can achieve computer synchronization control. Provide negative voltage spike excitation pulse output and receiving amplifier.
