Brief introduction: Specification: 30 kn, 50 kn, 80 kn and 100 kn Usage: used for all kinds of metal and alloy material under the environment of high temperature creep properties and the creep limit of lasting strength test and the test material, durable performance parameters such as ultimate strength. Features: 1. The drum type high temperature furnace high working efficiency, and is a traditional of type high temperature furnace more than ten times as much; 2. The electric control system of the high temperature furnace to move up and down, linear guide leads to security and stability; 3. Electric hoist drum high temperature furnace, the operator without exposure to high temperature furnace, greatly reduce the labor intensity and safe and reliable; 4. The drum type high temperature furnace heat preservation effect is good, all temperate long (200 mm), high temperature can reach 1200 ℃; 5. Drum type high temperature furnace safety performance is good, there is no leakage hidden trouble, in line with international safety standards; Table 6. Drum type high temperature furnace furnace temperature is low, the import insulation to ensure below 90 ℃ (1200 ℃) of the furnace temperature table, 7. Using full digital ac servo unit and high precision, high response frequency of the ac servo motor; 8. A manual unloading regulating function, accidental power failure can effectively protect the machine, especially the load sensor. Technical parameters: The biggest test force: 10 KN Level of testing machine: 0.5 on the Richter scale are unlikely Test force measuring range: 0.2 kN ~ 10 kN The test force relative error value: the value plus or minus 1% Chuck eccentricity: up and down 10% or less Minimum weight force value: 0.5 N Leverage ratio: 1:15 Leverage the offset (automatic leveling range) : + / - 0.10 mm Anti-roll bar move speed: slow (automatic leveling) 2.5 mm/min fast 50 mm/min Leveling motor power: 180 w The loading motor power: 100 w Anti-roll bar stroke: 200 w Power: 380 v + / - 10%
Brief introduction: Specification: 30 kn, 50 kn, 80 kn and 100 kn Usage: used for all kinds of metal and alloy material under the environment of high temperature creep properties and the creep limit of lasting strength test and the test material, durable performance parameters such as ultimate strength.
