CT100-1A peristaltic pump Introduction
The metal housing design, buttons and display are designed with advanced ergonomics at an angle of 30° to the horizontal. Acid and alkali resistant, corrosion resistant.
In English and Chinese, the speed is increased to 200 rpm and the touch screen is controlled.
It can realize simple dispensing, timing quantitative, continuous packaging, flow testing and other functions. Features
Touch screen operation
Start and stop functions
Clockwise and counterclockwise operation, LED indication operation
Speed adjustment function (increasing speed and deceleration), which can display the speed and direction
Full speed function (to achieve fast filling and draining of pipes)
Communication with the host computer (computer)
External control function (standard current, voltage, pulse signal control speed; level signal control start and stop, direction)
Power-down memory function
Leakage and overheat protection
Simple dispensing function, which can set running time, intermittent time, running times, realize timing quantitative, continuous dispensing, flow testing, etc. Technical Parameters
Speed range: 0.1-200 rpm, resolution 0.1 rpm
Timing running time: 1~999 seconds/minute/hour
Intermittent time: 1~999 seconds/min/hour
Number of cycles: 0~999 times (0 is an infinite loop)
External control interface: start-stop control, direction control, speed control (0-5V/0-10V, 4-20mA, 0-10kHz)
Communication method: RS485 half duplex
Applicable power supply: suitable for a wide range of voltages 90-260V AC, 50/60Hz
Maximum power: <40W
Working environment: ambient temperature 0-40 ° C, relative humidity <80%
Weight: 2.6kg
Dimensions: 228 × 133 × 160 (length × width × height) mm
Protection level: IP31
Introduction
The metal housing design, buttons and display are designed with advanced ergonomics at an angle of 30° to the horizontal. Acid and alkali resistant, corrosion resistant.
In English and Chinese, the speed is increased to 200 rpm and the touch screen is controlled.
It can realize simple dispensing, timing quantitative, continuous packaging, flow testing and other functions.
