Brief introduction: CST700 reinforcement corrosion on-line tester is completely controlled by the microcomputer automatic concrete reinforcement corrosion field measuring instrument, suitable for buildings, roads, Bridges, on-site detection rate of steel corrosion in concrete structures. Instrument made from high quality CMOS and BiFET ® integrated circuit composition, key components are all made of low power consumption device, advanced power management devices greatly extended the battery working time, the instrument adopts 128 * 64 dot matrix Chinese character display LCD screen, humanized menu design, stable performance, compact structure, high degree of automation, instrument built-in RS232 interface can be used to upload historical measured data to PC. Used in construction, road and bridge of steel corrosion in concrete structure detection; Features: 1. The Guard ring and intelligent compensation technology, the conventional LPR technology, improve the measurement precision of the steel corrosion rate; 2. Automatic measurement or concrete resistance compensation; 3. The ageing concrete structure repair project of quality control in monitoring; 4. Used for large buildings, Marine engineering construction in the on-line monitoring of corrosion of reinforcement in concrete. Technical parameters: Concrete corrosion rate measuring range: 1 x 10-4-10.0 mm/a Concrete resistivity: 1 w ~ 1 mw, CM The Flash ROM: 64 kbyte (2000 set of data can be stored) Real-time clock error: + 1 minutes per year (with battery) Instrument size: 36 cm (wide) 14 cm * 30 cm (deep) * (high) Absolute accuracy: plus or minus 5% DA: resolution of 16 bits AD resolution: 16 bits Power supply: section 4 nickel metal hydride rechargeable batteries Working temperature: - 10 ℃ to 50 ℃ °
Brief introduction: CST700 reinforcement corrosion on-line tester is completely controlled by the microcomputer automatic concrete reinforcement corrosion field measuring instrument, suitable for buildings, roads, Bridges, on-site detection rate of steel corrosion in concrete structures. Instrument made from high quality CMOS and BiFET ® integrated circuit composition, key components are all made of low power consumption device, advanced power management devices greatly extended the battery working time, the instrument adopts 128 * 64 dot matrix Chinese character display LCD screen, humanized menu design, stable performance, compact structure, high degree of automation, instrument built-in RS232 interface can be used to upload historical measured data to PC. Used in construction, road and bridge of steel corrosion in concrete structure detection;
