CS2350M Dual Potentiostat Introduction: CS2350M dual potentiostat has built-in two sets of potentiostat/galvanostat, each set of potentiostat has a set of auxiliary, working and reference electrode outputs, and the output potential/current is completely coordinated by CS Studio test software, CS2350M is the real meaning on the dual-channel electrochemical workstation. Specific applications: 1. The dual channels are used independently, and two groups of conventional electrochemical tests can be performed at the same time; 2. The combination of dual channels can be used for electrochemical analysis of four-electrode working systems, especially in the collection of oxygen reduction (ORR) intermediates and metal hydrogen diffusion testing. Technical advantages: The CS2350M dual potentiostat not only has the high precision, wide range and powerful data analysis and processing functions of CS single-channel series, but also makes innovative breakthroughs on the basis of the original products. The CS2350M dual-channel hardware design can meet the test requirements of two sets of experimental systems, and at the same time, the combined programming function of the software greatly improves the efficiency of the experiment. Technical parameter: Single potentiostat potential control range: ±10V, double potentiostat potential control range: ±10V Potential control accuracy: 0.1% × full scale reading ±1mV Potential Sensitivity: 10μV(>100Hz), 3μV(<10Hz) Potential rise time: <1μs (<10mA), <10μs (<2A) Reference electrode input impedance: 1012Ω||20pF Slot voltage output: ±21V CV and LSV scanning speed: 0.001mV～10,000V/s CA and CC pulse width: 0.0001 to 65,000s SWV frequency: 0.001～100KHz AD data acquisition: 16bit@1MHz, 20bit@1kHz DA resolution: 16bit, setup time: 1μS Communication interface: network port Dimensions (cm): 36.5(W)X30.5 (D)X16 (H) Constant current control range: ±1A Current control accuracy: 0.1% x full scale reading Current sensitivity: 1pA Current range: 2A～2nA, 10 levels in total Maximum output current: 1A Current sweep increment: 1mA @1A/mS Potential sweep potential increment: 0.076mV @1V/mS DPV and NPV pulse width: 0.0001～1000s Minimum potential increment of CV: 0.075mV Current and Potential Range: Automatically set Low-pass filter: 8-segment programmable Instrument net weight: 7.5Kg
CS2350M dual potentiostat has built-in two sets of potentiostat/galvanostat, each set of potentiostat has a set of auxiliary, working and reference electrode outputs, and the output potential/current is completely coordinated by CS Studio test software, CS2350M is the real meaning on the dual-channel electrochemical workstation. Specific applications: 1. The dual channels are used independently, and two groups of conventional electrochemical tests can be performed at the same time; 2. The combination of dual channels can be used for electrochemical analysis of four-electrode working systems, especially in the collection of oxygen reduction (ORR) intermediates and metal hydrogen diffusion testing. Technical advantages: The CS2350M dual potentiostat not only has the high precision, wide range and powerful data analysis and processing functions of CS single-channel series, but also makes innovative breakthroughs on the basis of the original products. The CS2350M dual-channel hardware design can meet the test requirements of two sets of experimental systems, and at the same time, the combined programming function of the software greatly improves the efficiency of the experiment.
