Brief introduction: KD series cell culture transfer machine is a new generation transfer machine developed by our factory according to the characteristics of cell culture of biological products and the actual production process. It has the characteristics of light weight, small volume, low noise, easy speed adjustment. Widely used in cell culture, hospital, laboratory and other pharmaceutical industries of biological products; The machine is made of stainless steel 304 material, easy to clean, the shaft rod is hollow aluminum alloy pipe wrapped with silicone rubber material resistant to ultraviolet radiation, with optional stop-over alarm, UPS uninterrupted power supply, computer remote monitoring, meeting GMP requirements. Structural features: Frame: KD series rotary bottle machine is stainless steel frame. It adopts nc water to cut the positioning hole and assembly hole of the bearing seat for cold processing. It has high precision, accurate positioning and no deformation of materials. Shaft roller: the roller core of KD series rotary bottle machine adopts nylon oil-free bearing inside hollow metal tube, which can reduce the weight of the whole machine. There is no pollution of bearing oil, the stress deformation is small, and the weight is lighter than that of solid core roller. Synchronous belt and wheel: the synchronous belt and wheel of KD series rotary bottle machine are the key transmission parts in the rotary bottle machine. The diameter of the synchronous wheel is 1.5 times larger than that of the peers. The 18-tooth synchronous wheel with more teeth than the peers is used to match the synchronous belt. Motor: the motor position used in the KD series rotary bottle machine is the first class product in China, adopting the digital frequency conversion motor, with high efficiency and speed control accuracy (can achieve 1% accuracy), low noise, and continuous use without temperature rise for a long time. Control system: KD series to turn the bottle machine control system adopts computer PIC circuit, operation panel man-machine interface membrane switch control, the speed of the bottle can be digital display, intuitive and clear, have run time setting, have run time memory, display and alarm function, and then optional 485 communication function, has the output interface, with special software, convenient for the user's computer remote control. Power supply: the KD series rotary bottle machine adopts the switch power supply similar to color TV, which has a wide range of voltage and can work normally under the single-phase 110-240v ac power supply. The side of the rotary bottle machine is equipped with the same power socket. Users can connect multiple rotary bottles to use in series, instead of setting many power sockets in the constant greenhouse. The equipment is equipped with UPS uninterrupted power supply, which can work continuously for more than 5 hours in the state of power failure. Main technical parameters: Model: R - 9-5-3 L Transfer capacity: 45 bottles Transfer specification: 3L Machine weight: 96Kg Working mode: continuous Speed adjustment range: 0~90 RPM Nominal power: 40W (actual use: 12W) Dimensions: 750 x 610 x 1680 (3L) Power condition: 220V50Hz
