| Measurement items | |
| Measurement items | Point, line, circle, partial circle, ellipse, arc processing (arc radius, center distance, distance from center to line, distance from intersection point to center, etc.), highest point, lowest point, distance, angle processing (coordinate angle, straight line angle), Straightness, groove depth, groove width, edge distance, groove center distance, horizontal distance, convexity (logarithmic curve), contour, etc. |
| Measuring range | |
| X axis (transverse guide rail) | 100mm |
| Z1 axis (sensor) | 25mm |
| Z axis (column moving distance) | 500mm |
| Z axis (column height) | 400mm |
| Certainty of measurement | |
| X axis (LX axis guide rail moving distance) | ±(1+2L/100) μm |
| Z1 axis (H=Z1 axis height measurement) | ±(1.8+3H/100) μm |
| X-axis horizontal arm | |
| Straightness | 0.2μm /60mm |
| Grating resolution | 0.1μm |
| Raster origin | enter port |
| Z1 axis sensor | |
| Resolution | 0.1μm |
| Sensor type | Grating sensor |
| Origin | Import |
| Direction of movement | Forward/backward direction |
| Load | 0.01-0.06N |
| Needle tip | Cemented carbide: 0.05mm / 0.01mm |
| Climbing angles | Up 77 degrees, down 88 degrees. |
| Velocity | |
| Measurement speed | 0.1mm/s,0.2m/s,0.5mm/s（Custom） |
| Positioning speed | Fast, medium, slow (custom) |
| Graphic magnification / reduction | |
| Graphic amplification | Scalable, magnified |
| Installation requirements | |
| Electric source | 220-240V AC, 50HZ, single ground wire; maximum power consumption 450W |
| Compressed air | Pure compressed air: 0.4MPp, consumed 0.1m3 / min (0.25m3 / min supplied by gas source) |
| Environmental requirements | Working temperature: 10 °-30 °(normal temperature); humidity 20-80%RH (no dew), good ground line, no obvious vibration source |
| Measurement items | Point, line, circle, partial circle, ellipse, arc processing (arc radius, center distance, distance from center to line, distance from intersection point to center, etc.), highest point, lowest point, distance, angle processing (coordinate angle, straight line angle), Straightness, groove depth, groove width, edge distance, groove center distance, horizontal distance, convexity (logarithmic curve), contour, etc. |
Please inquire
Please inquire
