Introduction: TNBDRL-04 automatic melt sampler is an X-ray fluorescence analyzer melting sample method professional auxiliary equipment, can be widely used in steel, metallurgy, chemical industry, geology, cement, ceramics, refractories and other industries sample preparation, the use of touch screen display control, friendly interface , Easy to operate, high degree of automation, fast heating, accurate temperature control, energy saving, stable operation, temperature up to 1100°C, excellent melting effect on refractory materials, good reproducibility of melt samples, The index has excellent performance and has a good price/performance ratio. Features: 1. High work reliability The machine adopts special refractory materials and electrical components, and applies advanced design concepts to ensure stable performance during use. With low failure rate, significant energy-saving effect, beautiful appearance and so on. 2. High degree of automation The machine designed the manipulator to enter and exit the sample, the swing melting and the automatic pouring in the furnace. The four pieces can be melted at one time, which has the characteristics of small volume, high automation, high work efficiency, and little impact on the operator's thermal radiation. Achieve full cold-to-cool operation. 3. Flexible operation The machine uses a new intelligent operating system, one-button operation, with a simple operation, reliable operation and so on. 4 has a number of protection features There are many protection functions designed, such as burnout, over-temperature, etc. When the temperature exceeds or exceeds the limit stroke, dual protection of hardware and software is also used to ensure the long-term stable operation of the equipment. Technical Parameters: Host: 730mm×600mm×650mm (length×width×height) Controller: 620mm × 420mm × 250mm (length × width × height) Rated operating temperature: 1100°C Heating rate: average 30°C/min Temperature control accuracy: ±1°C during heat preservation Number of sample positions: 4 positions (in-furnace automatic pouring molding) Swing angle: ±40° adjustable Swing frequency: 1HZ (adjustable) Instrument weight: 150Kg Rated power: 7.5KW Rated voltage: Single phase 220V Rated current: 35A Rated frequency: 50HZ
Introduction: TNBDRL-04 automatic melt sampler is an X-ray fluorescence analyzer melting sample method professional auxiliary equipment, can be widely used in steel, metallurgy, chemical industry, geology, cement, ceramics, refractories and other industries sample preparation, the use of touch screen display control, friendly interface , Easy to operate, high degree of automation, fast heating, accurate temperature control, energy saving, stable operation, temperature up to 1100°C, excellent melting effect on refractory materials, good reproducibility of melt samples, The index has excellent performance and has a good price/performance ratio.
