CM-230 online conductivity monitor Introduction
This instrument is an industrial process conductivity online monitoring panel instrument. The range switching and constant calibration can be freely set and adjusted through the operation components of the rear panel; stable operation and accurate measurement; automatic temperature compensation; maintenance-free, ideal for a variety of small pure water equipment. Technical Parameters:
Measuring range: 0 to 19.99, 0 to 199.9, 0 to 1999 μ S · cm -1
Electronic unit basic error: ± 2.0% (FS) ± l words
Instrument basic error: ± 3.0% (FS) ± l words
Stability: ± 1% ( FS ) /24h
Matching electrode: plastic structure Electrode constant: 1.0cm -1
Warming component: NTC
Medium temperature: 5 ~ 50 °C
Thread size: 1/2" pipe thread
Medium pressure: 0 ~ 0.5Mpa
Cable construction: RVP+ coaxial shielding
Cable length: 5m or determined by the user
Temperature compensation: automatic compensation based on 25 °C
Display mode: 31/2LCD
Output signal current: 4 ~ 20mA
Power supply: AC 220V ± 10% 50Hz
Power consumption: 1W
Environmental conditions: (1) Temperature 0 to 40 °C (2) Humidity ≤ 90%
Dimensions: 48 × 96 × 100mm (height × width × depth)
Opening size: 45 × 92mm (height × width)
Introduction
This instrument is an industrial process conductivity online monitoring panel instrument. The range switching and constant calibration can be freely set and adjusted through the operation components of the rear panel; stable operation and accurate measurement; automatic temperature compensation; maintenance-free, ideal for a variety of small pure water equipment.
