Introduction: CLJ-R series dust particle sensor can install one or more monitoring points according to the actual situation on site, and the measured data will be directly displayed on the display screen of each monitoring point. If there is an abnormality during real-time monitoring, each monitoring point can be quickly notified, which makes remote monitoring or monitoring in process-limited areas more convenient. CLJ series dust particle sensors can monitor 0.3μm, 0.5um and 5.0um particles, and meet the requirements of GMP, FDA and ISO21501-4. At the same time, the CLJ series includes multiple models, and customers can choose their own models according to actual needs. Features: 1. Reasonable structure design, small size, easy installation 2. Particle size channel: 0.3um-25um optional 3. Sampling flow rate: 1CFM (28.3LPM) or 0.1CFM (2.83LPM) optional 4. Three kinds of status indicator lights: power indicator light; communication indicator light; measurement status indicator light 5. RS485 (modbus), 4-20mA, WIFI, LORA, TCPIP and other signal output methods are optional 6. Using foreign original laser diode and vacuum pump, long service life 7. 2.4-inch OLED display, intuitive and clear reading 8. 316 stainless steel shell can be customized 9. Custom explosion-proof sensors Technical parameter: Counting efficiency: 50%±20% @ minimum channel size, 100% ±10% for particles >1.5 X - 2X channel particle size (conforms to ISO21501-4 and JIS) Zero count degree: <1 count/5 minutes (ISO 21501-4 and JIS) Monitoring range: 100-level --- 300,000 level Shell material: 304 stainless steel Compliant with standards: JIS B9921; ISO21501-4 Operating environment: 10-40℃, 20%-95% non-condensing
Introduction: CLJ-R series dust particle sensor can install one or more monitoring points according to the actual situation on site, and the measured data will be directly displayed on the display screen of each monitoring point. If there is an abnormality during real-time monitoring, each monitoring point can be quickly notified, which makes remote monitoring or monitoring in process-limited areas more convenient. CLJ series dust particle sensors can monitor 0.3μm, 0.5um and 5.0um particles, and meet the requirements of GMP, FDA and ISO21501-4. At the same time, the CLJ series includes multiple models, and customers can choose their own models according to actual needs.
