Brief introduction: ClearFirst-3000Purifier protein purification system is one key protein purification system developed by Shanghai flicker biology. It is mainly used to replace the AKTAPurifier protein purification system of GE company in the United States. It is mainly used in the purification of protein in the laboratory of large life science, compared with the traditional method, which greatly improves the efficiency of the purification work and saves a lot. The amount of manpower and material resources. The performance of ClearFirst-3000Purifier protein purification system in pump, detector, distillate collector and control workstation software surpasses the AKTAPurifier protein purification system of GE company. It has very powerful function and high performance price ratio. It is the choice of the protein purification laboratory of our country. Instrument characteristics: 1, The use of dual PEEK high pressure pump to form a high-precision gradient curve, to avoid bubble generation, with high practical value. 2, The use of high-precision constant current pump, small pulsation, stable baseline, accurate flow output, performance is much higher than the peristaltic pump system; 3, The flow rate is 0-10 ml/min, and the flow rate is 0-100 ml/min. 4, The four wavelength detector can be used to detect any four wavelengths between 190-850 nm simultaneously. 5, The automatic fraction collector eliminates the problem of pipe jumping, disorder and overflow, and has high stability. 6, The X-Y matrix collector has no motor at the bottom, and the safety is better than that of the disc fraction collector. 7, A high quality gradient curve can be formed and the performance is much higher than that of the gradient cup communicant system. 8, High precision distillate collection software ensures the accurate matching of test tube and peak position, and finds convenience. 9, A three-way valve with waste liquid is collected, which can be collected only after high and medium pressure. 10, Accurate collection of peaks, avoid omission and cross contamination, and save manpower; 11, With peak collection, time, level, manual collection and other modes, high flexibility. 12, The flow cell can use different optical path to adapt to different analysis and purification requirements. 13, With the method database, preset different purification methods can be called at any time, and one key completes automatic operation. 14, The principle and structure of a large range and high precision special conductivity detector are the same as that of imported products. 15, The standard PH detector has the function of temperature correction, and its accuracy is better than that of imported products. 16, Compact size, very easy to put equipment into chromatography freezer. 17, The system pressure piping is basically PEEK material, good pressure and biocompatibility. 18, The use of multi way valve sampling way, accurate sampling, to avoid air into the system; 19, The instrument can be fully controlled by computer, which greatly reduces the difficulty of using. 20, Self checking, user management and sample management can be used to connect LIMS information system. 21, The fraction collection test tube can reach 120, and the number of distilled fractions is better than that of imported products. 22, Using grating monochromator, the wavelength accuracy is better than 0.2nm, and the detection sensitivity is better than that of diode array products. 23, The workstation is full of Chinese interface and convenient to use. 24, We need to upgrade the multiway valve buffer expansion module (8 or 12, 2 channels) to form more buffers. 25, the instrument can be controlled by panel, tablet, notebook computer and desktop computer. 26, The instrument can be fitted with large volume injection system and injection pump for large volume injection. 27, The instrument can use multi-channel chromatography column switching system for different chromatographic column switching. 28, The hardware configuration and software function of this instrument are better than that of AKTAPurifier purification system. 29, This instrument fraction collector can change different collection quantities by switching different test tubes. 30, This instrument supports fully automatic injector and totally unmanned operation. Instrument parameters: 1, Solvent compatibility: water buffers commonly used for purification of biomolecules; 2, The velocity range is 0.001-10ml/min (optional 0.01-100ml/min). 3, The pressure range: 0-42MPa (420bar, 6000PSI); 4, Viscosity: up to 5cP; 5, Wavelength range: 190-850nm; 6, The length of light diameter: 2mm; 7, The range of electrical conductivity: 1uS/cm-999.9mS/cm; 8, The range of PH determination: 0-14.00; 9, PH measurement precision: 0.01PH unit, temperature compensation; 10, The test tube load: 120 (15-18mm); Instrument use: 1, Protein purification (gel, ion exchange, hydrophobic interaction, affinity and other methods); 2, The separation and purification of nucleic acid; 3, The separation and purification of macromolecule impurities in antibiotics; 4, The separation and purification of natural products;
Brief introduction: ClearFirst-3000Purifier protein purification system is one key protein purification system developed by Shanghai flicker biology. It is mainly used to replace the AKTAPurifier protein purification system of GE company in the United States. It is mainly used in the purification of protein in the laboratory of large life science, compared with the traditional method, which greatly improves the efficiency of the purification work and saves a lot. The amount of manpower and material resources. The performance of ClearFirst-3000Purifier protein purification system in pump, detector, distillate collector and control workstation software surpasses the AKTAPurifier protein purification system of GE company. It has very powerful function and high performance price ratio. It is the choice of the protein purification laboratory of our country.
