Features:
1. Multiple stirring magnetic stirrer.
2. Accurate digital display speed function.
3. The latest patented product, using round nano-composite material as anti-corrosion above, can be used for magnetic stirring alone, or can be placed such as electric heating sleeve, water bath pot, etc. for heating and stirring.
4. Adopt DC brushless speed regulating motor, stable performance, low noise, long life and no spark.
5. The outer casing is made of metal injection molded casing, which is resistant to high temperature, corrosion and good insulation performance.
The 6.30° bevel control panel is suitable for sitting and standing viewing angles.
7. Stepless speed regulation, low speed and high speed.
Technical Parameters:
Power supply : 220 V /50 HZ (can also be exported 110 V /60 HZ)
Face plate material: Nanocomposite (corrosion resistant, acid and alkali resistant, smooth and easy to clean)
Working size: O 150 mm, O 200 mm, O 250 mm, O 310 mm
Motor Power: Motor 40 W X 2/ X 4/ X 6 DC 18 V
Speed range: 60-2500 rpm
Timing range: 1-999 Min
Stirring capacity: 50-10000 ml X 2/ X 4/ X 6
Working time: continuous
Dimensions: 900 X 350 X 130 mm
Packing size : 1005 X 410 X 190 mm
Weight : 21 Kg ±500 g Instructions:
1. Fix the vertical rod in the upper screw hole of the stirrer, adjust the height of the cross clamp, fix the reaction bottle with the universal clamp, put in the appropriate stirrer, insert the power supply ~220V, and open the switch.
2. Speed setting: Turn on the switch and enter the stirring state. The r/min window has a digital display. Press the SET button, the number of the r/min window flashes, and the number of the r/min window can be adjusted by the “<”, “∨” and “∧” buttons. Press the SET button again to exit the r/min window speed setting state, and the r/min window speed setting is completed. When the instrument is working, the r/min window displays the measured speed. 100-2500 rpm, LCD display, button selection, low speed and high speed.
3. Timing function: Turn on the switch, and the time window displays the timing of the last operation setting. Press SET setting button, the number of r/min window flashes, then press SET setting button, r/min window setting state exits, the number of time window flashes, the number of time window can pass “<” “∨” “∧” button adjustment. Press the SET button again to exit the time window setting time and the time window time setting is completed. Set the required timing time such as: 5 minutes, the number of time window decreases with the increase of the stirring time, 5, 4, 3, 2, 1 until the end is displayed, the stirring stops, and the r/min window displays “0”. ". The timing window is in minutes, the timing range is 1-999, and the time window number is set to “0”, which is an untimed state.
4. The experiment is completed and the switch is turned off. Stir again and turn the switch back on before you can use it.
5. When the SET setting button is pressed to adjust each function parameter, there is no button operation within 8 seconds, and the instrument automatically exits the setting state and enters the normal display state. If the parameter still needs to be adjusted, you need to press the SET setting button again to enter the setting state.
Features:
1. Multiple stirring magnetic stirrer.
2. Accurate digital display speed function.
3. The latest patented product, using round nano-composite material as anti-corrosion above, can be used for magnetic stirring alone, or can be placed such as electric heating sleeve, water bath pot, etc. for heating and stirring.
4. Adopt DC brushless speed regulating motor, stable performance, low noise, long life and no spark.
5. The outer casing is made of metal injection molded casing, which is resistant to high temperature, corrosion and good insulation performance.
The 6.30° bevel control panel is suitable for sitting and standing viewing angles.
7. Stepless speed regulation, low speed and high speed.
