CGI-06-F High Speed Cell Transfer Bottle Cultivator Introduction: The CGI-06-F high-speed cell rotation bottle incubator is suitable for laboratory small-scale cell culture. The product can be placed in a conventional carbon dioxide incubator, saving the cost of purchasing a large incubator or constructing a constant temperature chamber. Features: 1. LED digital display; 2. Brushless motor or stepper motor drive, with long service life and low noise; 3. Oil free bearings, clean and pollution-free; 4. Special rollers, odorless, slag free, corrosion-resistant, ozone resistant, and operate smoothly; 5. Multiple rotation modes, multiple speeds, and flexible operation; 6. Fully active wheel design to prevent the culture bottle from slipping; 7. The humanized bottle stopper wheel design has a limit function and is convenient for taking and placing bottles; 8. Can be placed in a constant temperature incubator for use; 9. Double row stall alarm. Technical parameters: Cell culture type: adherent culture Product model: CGI-06-F Product Name: Cell Transfer Bottle Cultivator Main distinguishing features: low speed, suitable for 1500ml culture bottles Bottle rotation speed: 3-60 revolutions per hour (0.05-1rpm) (when the bottle diameter is 110mm) Rotation mode: unidirectional forward rotation/unidirectional reverse rotation/bidirectional alternating forward and reverse rotation (angle 10~180) Applicable bottle range: Φ 100mm~Φ 113mm, L ≤ 285mm Standard bottle: Φ110mm,L=285mm (1500ml) Number of bottles per layer (units): 3 Number of bottle positions: 6 Material: Aluminum alloy Digital control display function: bottle speed display/reversing angle display/running time display Automatic call recovery function: available Fuse: 4A250V Communication interface: RS 485 Dimensions: 450 × 360 × 431.5mm Maximum load (L): 9 Environmental temperature: 5 ℃~70 ℃ Relative humidity: <90% Power: 70W Power supply: AC220V ± 22V, 50/60Hz Net weight: 22kg
Introduction: The CGI-06-F high-speed cell rotation bottle incubator is suitable for laboratory small-scale cell culture. The product can be placed in a conventional carbon dioxide incubator, saving the cost of purchasing a large incubator or constructing a constant temperature chamber.
