Cell@ 188 CO2 incubator Introduction
The New Cell@ 188 Direct Heat CO2 incubator, equipped with an“on-demand”decontamination cycle, is designed to provide a stable and convenient environment for Cell and Tissue culture, taking into consideration the most stringent needs of the cell biologists, for both continuous and batch cultures. The Cell@ 188 maintains an accurate CO2 gas percentage, uniform temperature and a consistently high level of humidity providing a stable culturing environment, even for most critical applications like iVF and Hybridoma cultures. Features
large usable capacity and maximum space for your cultures
culturing environment guaranteed
Comfort for your cultures is guaranteed ...Precise control and recovery of set temperature
Precise control and recovery of set CO2 percentage
Fully automatic 12 hours decontamination cycle
A number of features designed to ease your work Technical Parameters
Temperature control: direct heat, 6 sides, 4 independent control heaters, 73 m heating element
Temperature range: 10-50 °C, 0.1 increments (minimum setting: ambient temperature + 1 °C)
Temperature measurement: seven RT curve matching thermistors
Temperature control; ±0.1 °C
Temperature accuracy: ±0.1 °C
Uniform temperature: better than ±0.3 °C
Temperature recovery: about 5 minutes after opening the door for 15 seconds
Over temperature protection: Independent, stop all heaters when the set temperature value exceeds 1.0 °C (when the control system fails)
Carbon dioxide system
Sensor: Solid-state infrared sensor, the atmospheric carbon dioxide is automatically zeroed. Measurements are not affected by indoor humidity.
Carbon dioxide range: 0.5 ~ 20% carbon dioxide, 0.1% increment
CO2 control: ± 0.1% CO2
Uniformity: better than ± 0.1% carbon dioxide
Accuracy: ±0.2% at 5% CO2 set point
Recovery rate: about 5 minutes after opening the door for 15 seconds
Relative humidity system
Storage: 2.5 liter, 304 stainless steel electrolytic polishing humidity tray
Relative humidity level: 95% minimum (adjustable in a small range by pedestal heater setting)
Disinfection cycle
Disinfection cycle type: fully automatic, 125 °C cycle, verification
Temperature rise time: 1.5-2.5 hours
Exposure time: 4 hours
Temperature drop time: 5-7 hours
Total cycle time: 10.5 to 13.5 hours
structure
Interior: 304 stainless steel, completely seamless, electrolytically polished
Number of rooms (total/available): 188.6 liters / 140 liters
Internal dimensions (width x height x depth) mm: 530 x 690 x 500
Dimensions (width x height x depth) mm: 680 x 896 x 746
Appearance: Powder coated low carbon steel with ABS plastic outer door cover
Internal passage: heated exterior door with direct access or sealed inner glass door (optional 4/8 inner glass door)
Door swing: Open left optional door (factory installation)
Net weight: 102 kg
Package weight: 135 kg
Shelving system
Shelf: Easy to assemble, 304 stainless steel construction with high temperature plastic gasket
Shelf type: sturdy (non-perforated) stainless steel shelf (optional with holes)
Shelf size (width x depth) mm: 510x 455 mm, each shelf 150 mm high
Shelf surface area, square meter: 0.23 square meters (2.76 square feet)
Capacity: Standard - Maximum: 4-8 shelves
alarm system
Chamber status alarm: fully programmable, audiovisual, automatic reset when chamber conditions are restored
Incubator function alarm: Fully automatic alarm prompt heater or sensor failure
Alarm event log: Cycles up to 500 in-memory alarm events on a 2 x 24 display, showing programmed values, actual values, time and duration of alarm events
Power requirement
Voltage: 220-240V, 50 / 60Hz
Rated power: 1.5 kW
Maintain the required power at 37 °C: <0.1 kW
External connection
RS 232 output: operating conditions, alarm and event data output
RS 232 interface: standard supply for remote access
Remote alarm contact: no voltage for connection to a remote external alarm or alarm system (BMS)
Introduction
The New Cell@ 188 Direct Heat CO2 incubator, equipped with an“on-demand”decontamination cycle, is designed to provide a stable and convenient environment for Cell and Tissue culture, taking into consideration the most stringent needs of the cell biologists, for both continuous and batch cultures. The Cell@ 188 maintains an accurate CO2 gas percentage, uniform temperature and a consistently high level of humidity providing a stable culturing environment, even for most critical applications like iVF and Hybridoma cultures.
