CEL-PE300-3A Uniform Xenon Lamp Light Source Introduction: The photocatalysis uses a uniform light source and PerkinElmer 300W bulb, which is a new 3A light source that is very close to the solar spectrum. 300W simulated fluorescent xenon lamp light source is used for photocatalysis, optoelectronic testing, and solar cell simulation analysis. The CEL-PE300 uniform xenon lamp light source adopts a compound eye lens system (fly eye lens) for uniform illumination, an AM1.5 standard filter, and an adjustable light intensity of 0.1-5Sun, achieving a multi-purpose light source for photoelectric testing, photoreaction, photocatalysis, simulated sunlight, and biological illumination. Features: 1. Simulate xenon light sources with sunlight approaching 3A level; 2. Hexagonal light spot output, closer to the fly eye structure, with better light equalization effect; (Optional quadrilateral light spot) 3. The output optical power is 0.1-5Sun (10-500mW/cm2), continuously adjustable; 4.7 inch intelligent touch screen: 800 * 480dpi; 5. Product design safety, multi-level safety protection such as grounding and high voltage; 6. The intelligent model adopts multiple control methods: * basic mode, * irradiation mode, * feedback mode, * intelligent mode 7. Cooperate with the NP2000 optical power meter to display the absolute irradiation value in real-time and stabilize the constant optical power in real-time; 8. It has achieved automatic startup, shutdown, automatic adjustment of optical power, customized switching times and frequencies, and digital monitoring; 9. The program mode can automatically and timely adjust the light intensity according to the requirements of different stages of the experimental time (it can fully simulate the changes in sunlight throughout the day) Technical parameters: Output optical power 0.1~5Sun (10~500mw/cm ²) Main configuration: 1 high stability xenon lamp power box (PF300-T6), equipped with imported 300W ceramic light bulbs (PerkinElmer), and the optical path steering device can be equipped with various filters, VisREF (350nm~780nm); 3A uniform lens Control mode: None Light uniformity (standard battery):<5%, hexagonal spot (optional quadrilateral spot) Spot diameter: 30-80mm (based on irradiation distance) Power stability: ＜ 0.5% Light stability: ＜ 0.5% Filter: can adapt to M62, M52, circular filter (Optional 50mm * 50mm filter fixture)
Introduction: The photocatalysis uses a uniform light source and PerkinElmer 300W bulb, which is a new 3A light source that is very close to the solar spectrum. 300W simulated fluorescent xenon lamp light source is used for photocatalysis, optoelectronic testing, and solar cell simulation analysis. The CEL-PE300 uniform xenon lamp light source adopts a compound eye lens system (fly eye lens) for uniform illumination, an AM1.5 standard filter, and an adjustable light intensity of 0.1-5Sun, achieving a multi-purpose light source for photoelectric testing, photoreaction, photocatalysis, simulated sunlight, and biological illumination.
