CEL-LPH120-254 Low Pressure Mercury Lamp Source System
Introduction: CEL-LPH120-254 Low-pressure mercury lamp light source system is equipped with 120W super-ultraviolet low-pressure mercury lamp. The main output wavelength is 254nm, 185nm adopts serpentine lamp tube, and the irradiation area is 128*128mm, which can realize projection illumination and side illumination. Technical features: 1) solid amalgam high emissivity low pressure mercury lamp (snake); 2) Amalgam is consolidated with the inner wall of quartz and can be placed horizontally or vertically; 3) Ultra-high radiation density, long life; 4) High temperature resistance, stable operation at 105 °C for a long time, does not affect the radiation intensity at all; 5) The illuminance is evenly distributed, and the snake-shaped return point adopts wind pressure to eliminate the illuminance weak point caused by the “necking” of the general product turning point; 6) Power: 120W; 7) Material: low hydroxyl synthetic quartz; 8) Lamp current: 1200mA; 9) Length: face type, peripheral size is about 140mm × 140mm, double-headed pin; 10) Startup form: must be warmed up. Product configuration: 1) 1 set of LPH120 main unit (including 1 254nm lamp); 2) Projecting support rods 4; 3) Power cord, manual, certificate, acceptance form, warranty certificate Optional: Due to strong light UV, it is recommended to purchase CEL-LB70 protective box
Introduction: CEL-LPH120-254 Low-pressure mercury lamp light source system is equipped with 120W super-ultraviolet low-pressure mercury lamp. The main output wavelength is 254nm, 185nm adopts serpentine lamp tube, and the irradiation area is 128*128mm, which can realize projection illumination and side illumination.