CEL-HPR+photocatalytic reactor Introduction: The high-end version of CEL-HPR+photocatalysis reactor adopts a large sapphire window, adopts a two-point temperature control (no impulse), and is equipped with a temperature-controlled mixing and 400mm stroke automatic lifting platform as standard; Technically, a new snap ring flange structure is adopted, and the module is heated to realize the functions of constant temperature timing and operation timing, and take liquid and gas samples online. The safer design can work 24 hours without interruption. characteristic: 1. Independent research and development of temperature control system, innovative use of double temperature control inside and outside the kettle to eliminate temperature overshoot; 2. It is equipped with sapphire (Al2O3) crystal window, which has high strength, high hardness, high temperature resistance, abrasion resistance, corrosion resistance, good light transmission performance and excellent electrical insulation performance; 3. Internal magnetic stirring: magnetic particle suspension stirring can be selected without exposed rotating parts; 4. The interior of the reactor body can be sprayed with polytetrafluoro to avoid pollution; 5. Both gas-solid liquid reaction and gas-solid reaction can be realized inside the kettle; 6. Realize material catalysis under high pressure (<10MPa) and high temperature (<300 ℃); 7. Double-line flange sealing technology solves the problem of traditional seal leakage and realizes rapid disassembly and assembly; 8. American anlok high-quality needle valve, three-way ball valve and pressure gauge are configured to flexibly control the pressure of the kettle; 9. The safety unloading valve is configured to add another safety to the experimental safety environment. Technical parameters: Volume: 100ml, 250ml, 25ml, 50ml, 500ml Window material: sapphire, light transmission diameter 40mm (30mm, 25ml, 50ml) Irradiation mode: top light projection (TOP), side light photocatalysis (Side) Working pressure: 10MPa, (can be customized to withstand 20MPa, 30MPa) Automatic platform: the height of the light source can be adjusted automatically to facilitate the loading of the kettle body, with a stroke of 400mm Kettle body material: 316L corrosion-resistant stainless steel (PTFE can be sprayed at any time, Hastelloy can be customized), lining (PTFE, quartz) Kettle cover: standard needle valve, three-way ball valve, unloading valve, double thermocouple, pressure gauge, and standby interface valve are American anlok; Connection mode: double crescent tooth snap ring and flange connection structure Sealing: high-temperature resistant graphite composite material is used for sealing, and double-line sealing structure is adopted Heating temperature:<300 ℃ (temperature control accuracy 0.1 ℃) Temperature control mode: double point temperature control inside and outside the kettle, double PID constant temperature program control Control display: LCD screen setting display: control temperature, kettle body temperature, furnace body temperature, magnetic stirring speed Power configuration: 200-240V/AC, 50-60Hz, 1000W Platform: supporting light source platform, which can realize automatic lifting and lowering of light source (optional 300W photocatalytic xenon light source (HXF300, PF300-T8), high-power LED (LED100HA), mercury lamp light source, etc.)
Introduction: The high-end version of CEL-HPR+photocatalysis reactor adopts a large sapphire window, adopts a two-point temperature control (no impulse), and is equipped with a temperature-controlled mixing and 400mm stroke automatic lifting platform as standard; Technically, a new snap ring flange structure is adopted, and the module is heated to realize the functions of constant temperature timing and operation timing, and take liquid and gas samples online. The safer design can work 24 hours without interruption.
