Introduction: The CEL-GPPCL gas-phase photocatalytic system can realize the gas mixing of multi-channel gas. It adopts the rotor flowmeter imported from the United States to realize any gas ratio according to the demand. The gas mixing chamber and pipeline temperature control (<200℃), the outlet pipeline adopts self-limiting Temperature pipeline. The system adopts multi-channel gas distribution system, multi-stage mixing reaction, pressure-resistant all stainless steel pipeline, and the reaction part is equipped with various mixing kettles, reaction kettles, reactors, and photocatalytic reactors according to requirements to realize corresponding photocatalytic experiments. The gas-phase photocatalysis online test system is mainly used in continuous phase photocatalysis, gas-solid phase photocatalysis, gas-liquid reaction photocatalysis, especially in the fields of pollutant degradation, catalytic synthesis, sulfurization reaction, thermal catalysis and other fields. Specifically, it can be applied to photocatalytic nitrogen fixation, photocatalytic carbon fixation, CO2 photocatalytic reduction, photocatalytic degradation of acetaldehyde, formaldehyde, catalytic degradation of VOCs, simple photothermal catalysis, etc. Technical Parameters: System pressure design: 2.0Mpa Air circuit: 3 ways (3 ways to control flow), air intake with filter and one-way valve Flow control: American original DWYER rotor flowmeter (100ml/min*2; 240ml/min, accuracy 3%) Pressure display: mixing chamber pressure gauge display Mixing chamber: 100ml, temperature control of mixing chamber and pipeline: room temperature—200℃ Outlet pipeline: stainless steel self-limiting temperature pipeline Pipeline valve: All imported anlok valves and joints, stainless steel 316L Dimensions: 400mm*400mm*270mm Optional reactor: 1. CEL-GPRT100 tripod reactor (gas-solid) 2. CEL-APR100H integrated temperature control reactor (gas-liquid) 3. CEL-HPRT100+ high pressure photocatalytic reactor (high pressure multi-phase) 4. CEL-GPCR100 gas-phase photocatalytic stainless steel national standard reactor 5. Photochemical experiment box LB70 6. Matching the whole series of xenon lamp, mercury lamp, LED and other light source systems
Introduction: The CEL-GPPCL gas-phase photocatalytic system can realize the gas mixing of multi-channel gas. It adopts the rotor flowmeter imported from the United States to realize any gas ratio according to the demand. The gas mixing chamber and pipeline temperature control (<200℃), the outlet pipeline adopts self-limiting Temperature pipeline. The system adopts multi-channel gas distribution system, multi-stage mixing reaction, pressure-resistant all stainless steel pipeline, and the reaction part is equipped with various mixing kettles, reaction kettles, reactors, and photocatalytic reactors according to requirements to realize corresponding photocatalytic experiments. The gas-phase photocatalysis online test system is mainly used in continuous phase photocatalysis, gas-solid phase photocatalysis, gas-liquid reaction photocatalysis, especially in the fields of pollutant degradation, catalytic synthesis, sulfurization reaction, thermal catalysis and other fields. Specifically, it can be applied to photocatalytic nitrogen fixation, photocatalytic carbon fixation, CO2 photocatalytic reduction, photocatalytic degradation of acetaldehyde, formaldehyde, catalytic degradation of VOCs, simple photothermal catalysis, etc.
