CEL-GPCR100 stainless steel temperature control reactor Introduction: According to the standard of GB/T23761-2009, the reactor with special photocatalytic materials is designed. The photocatalysis reactor is a fully closed square reactor, which is equipped with a size of 200 mm * 100 mm inside, and the distance between the surface of the sample and the window is about 5.0 mm. The baffle can be equipped as required to increase the gas-solid reaction time. The reaction gas can only pass between the sample surface and the window. Ultraviolet high transmittance quartz glass can be selected as the window material of optical path. characteristic: 1. The bottom of the reaction tank is heated by water bath 2. Close the cover, replace the catalyst, and open the cover 3. Upper pressing plate, fixed quartz window 4. Quartz view, window size 200x100mm 5. Baffle plate, catalyst carrier and baffle structure make the reaction more complete 6. 6mm to 3mm ferrule joint, gas inlet, connecting 3mm steel pipe 7. 6mm to 3mm ferrule joint, gas detection port, connecting 3mm steel pipe 8. Needle valve, used to regulate system flow and pressure 9. Three-way ball valve, switching valve 10. Blind plug, reserved opening 11. Tee, needle sampling port 12. 6mm to 3mm ferrule joint, gas outlet, connecting 3mm steel pipe 12. 3mm-1-8NPT, this port is used for installing thermocouple sleeve, namely temperature measuring port 14. The pressure gauge displays the reaction pressure in real time. Note that the reaction pressure should not exceed 1 bar1 15. 6mm ferrule connector, water bath inlet and outlet 16. Lower the gland and open it to clean the scale
Introduction: According to the standard of GB/T23761-2009, the reactor with special photocatalytic materials is designed. The photocatalysis reactor is a fully closed square reactor, which is equipped with a size of 200 mm * 100 mm inside, and the distance between the surface of the sample and the window is about 5.0 mm. The baffle can be equipped as required to increase the gas-solid reaction time. The reaction gas can only pass between the sample surface and the window. Ultraviolet high transmittance quartz glass can be selected as the window material of optical path.
