Introduction: CEL-FES300 multi-function optical fiber light source is another upgrade on the basis of the new T9 photocatalysis integrated xenon lamp light source. It realizes a multi-purpose machine, including a variety of experimental schemes and configurations, and realizes flexible configuration and flexible experiment Application: 1. PEC photoelectrochemistry 2. Solar cell test 3. Membrane photocatalysis 4. Photodegradation of gaseous pollutants (such as VOCs, formaldehyde, nitrogen oxides, sulfur oxides, etc.) 5. Photodegradation of liquid pollutants (such as dyes, benzene and benzene series) 6. Photocatalytic decomposition of water to produce hydrogen/oxygen 7. Photocatalytic total decomposition of water 8. Photocatalytic CO2 reduction 9. Photochromic Photosynthesis Technical parameters: Average optical output power density: 0~20 Sun Luminous spectrum range: 300nm~2500nm (ozone free) Working spot diameter: more than 60mm Optical fiber output square facula: 10 * 10mm - 60 * 60mm, adjusted by focusing lens Output uniformity of optical fiber square spot:<5% (<40mm) Optical fiber square spot output spectrum: 350-1100nm (built-in AM 1.5, analog solar spectrum output) Output optical power density of optical fiber square spot: less than 1000mW/cm ², （10mm，<1000 mW/cm ²； 20mm，<500 mW/cm ²; 40mm，<200 mW/cm ²; 60mm，<100 mW/cm ²） Electronic shutter: accuracy 0.01S, opening and closing time and cycle times can be set arbitrarily Output power in ultraviolet light area: 2.6W Infrared light area output power: 28.8W Visible light output: 5000Lu, 18.6W, 5600K Input power: 300W (lighting voltage 15KV, working voltage 14V) New 300W special power supply Working current: 21A (10A~22A) Total luminous output power: 50W Bulb life:>1000H Limit 6000H (dusty and humid environment will seriously affect the life) Optical output index: optical stability of optical fiber output:<± 0.5% Temperature control system: the light source system adopts multi-point temperature monitoring to ensure the stable output of the light source; The fan speed delay is automatically adjusted according to the system temperature to stabilize the light intensity output;
Introduction: CEL-FES300 multi-function optical fiber light source is another upgrade on the basis of the new T9 photocatalysis integrated xenon lamp light source. It realizes a multi-purpose machine, including a variety of experimental schemes and configurations, and realizes flexible configuration and flexible experiment
