C690H Packaging Non destructive Leak Detection System Introduction: The C690H packaging non-destructive leak detection system is based on the principle of vacuum testing and designed and manufactured according to standards such as ASTM F2338. It is specialized in batch sealing testing of penicillin bottles and can also perform trace leak detection of various drug packaging such as ampoules, vials, infusion bottles, and pre filled needles. characteristic: 1. Equipped with Labthink's latest technology, the fully automatic falling sampler can achieve continuous testing of 20 to 120 samples 2. AB dual channel design, capable of testing two different specifications of samples simultaneously 3. The target vacuum degree can be freely set to meet different detection requirements of the sample 4. Dual methods of vacuum and positive pressure effectively solve the problem of hole blockage 5. International advanced pressure detection technology, stable data, not affected by external environment 6. International advanced microfluidic automatic control technology can accurately simulate different sizes of leaks without manual adjustment 7. Both pressure and flow data can be traced back to NIST 8. The system can achieve higher test repeatability ± 1um Technical parameters: Test chamber: 1 set for Group A, 1 set for Group B Sample injector: 1 set for Group A, 1 set for Group B Sample size: ≤Φ 45 mm × 80mm Note 3 Sample quantity: 20~120 pieces Gas specification: Compressed air (self provided gas source) Gas source pressure: ≥ 40.6 PSI/500 kPa Interface size: Φ 6mm polyurethane pipe Dimensions: 33.4 "H x 19.6" W x 28.7 "D (85cm x 50cm x 73cm) Power supply: 120VAC ± 10% 60Hz/220VAC ± 10% 50Hz (choose one) Net weight: 209Lbs (95kg)
Introduction: The C690H packaging non-destructive leak detection system is based on the principle of vacuum testing and designed and manufactured according to standards such as ASTM F2338. It is specialized in batch sealing testing of penicillin bottles and can also perform trace leak detection of various drug packaging such as ampoules, vials, infusion bottles, and pre filled needles.
