Introduction: The C025 replaceable membrane 3H type electrolytic cell is upgraded on the basis of C008-1, and a light window is added. The light window of the electrolytic cell is made of quartz, and the light transmittance is greater than 95%. The locking ring link ensures the seal and facilitates the replacement of the quartz light window. The glass sealing parts of the working electrode chamber and the control electrode chamber of the electrolytic cell are designed with external threaded ports, and the inner core is made of 360-degree PTFE, so that the electrodes correspond to the channels accurately (generally the electrodes are parallel to the membrane). By tightening the POM The outer cover of the material is sealed. Features: 1. The electrolytic cell separates the reference electrode and the working electrode, and is connected by a Lukin capillary, which effectively reduces the R drop. 2. The hole diameter of the tip portion of the electrolytic cell Lukin capillary extending into the working electrode chamber is less than 0.2 mm. 3. Agar can be added to the Lujin capillary of the electrolytic cell to reduce the flow rate of the electrolyte. 4. The reference electrode chamber of the electrolytic cell is sealed with internal threads, which must be sealed during use to effectively avoid the seepage of the reference electrode chamber and the working electrode chamber due to the effect of the connector. 5. The working electrode, auxiliary electrode and reference electrode of the electrolytic cell can be matched according to the needs, and the electrodes must be lengthened. 6. The cell body of the electrolytic cell is made of high borosilicate glass, and the single-layer cell body has an overhead layer design, which can effectively break the solution hiding. 7. The electrolytic cell is often used in three-electrode system, and the volume of the electrolytic cell ranges from 30ml to 500ml, and can also be customized according to requirements. 8. The glass part of the reference electrode chamber of the electrolytic cell adopts internal thread design 9. The electrolytic cell is a relatively sealed electrolytic cell system. The cathode and anode chambers are isolated by an ionic membrane (provided by the user), and the two chambers are sealed and linked by a chain, which is convenient for replacing the diaphragm. 10. The electrode part of the electrolytic cell is sealed on the PTFE plug, and the sealing effect is achieved by pressing the ring with the sealing screw. 11. The electrolytic cell is equipped with an aeration device that can ventilate under the liquid surface, and different shapes of aeration devices are selected for the atmosphere according to different experiments. For example, straight-type aeration is used for carbon reduction, and L-type aeration is used for nitrogen reduction. 12. The electrolytic cell can add a sampling port on the cell body, at which time additional costs are required. 13. The electrolytic cell is a relatively sealed system. If an absolute sealing method is required, a valve should be added on the electrolytic cell cover. Please refer to C025-2 model. 14. The electrolytic cell is divided into two types: single-layer and double-layer. The double-layer adds a constant temperature water bath function on the basis of the single-layer. The solution reaches a constant temperature. 15. The 10ml electrolytic cell is designed with internal thread, please refer to "C025-10" for details
Introduction: The C025 replaceable membrane 3H type electrolytic cell is upgraded on the basis of C008-1, and a light window is added. The light window of the electrolytic cell is made of quartz, and the light transmittance is greater than 95%. The locking ring link ensures the seal and facilitates the replacement of the quartz light window. The glass sealing parts of the working electrode chamber and the control electrode chamber of the electrolytic cell are designed with external threaded ports, and the inner core is made of 360-degree PTFE, so that the electrodes correspond to the channels accurately (generally the electrodes are parallel to the membrane). By tightening the POM The outer cover of the material is sealed.
