C019 side-illuminated electrochemical cell Introduction: The working principle of the electrolytic cell is to allow the current to pass through the electrolyte solution (or molten electrolyte) and cause a redox reaction at the cathode and anode, so as to realize the conversion of electrical energy into chemical energy. Technical features: 1. The electrolytic cell is improved on the basis of C019-1 2. The electrolytic cell realizes atmosphere protection by adding valves and aeration devices. The valve connected to the aeration device is the direction of air intake. 3. The electrolytic cell is an absolutely sealed system, which can be evacuated through the valve (less than -1Mpa), the electrolytic cell can be slightly pressurized, and the pressure should not be greater than 0.5MPa for safety reasons. 4. The inner wall glass of the double-layer electrolytic cell is relatively weak due to process limitations, so it is forbidden to pressurize 5. The working electrode, auxiliary electrode and reference electrode of the electrolytic cell must be customized to match the electrolytic cell. 6. The electrode part of the electrolytic cell is sealed through the earphone jack on the lid to realize the internal insertion and removal of the electrode, so that the electrode system can be absolutely sealed. 7. The body material of the electrolytic cell is high borosilicate glass 8. The light window of the electrolytic cell is made of quartz, and the light transmittance is greater than 95% 9. The light window part of the electrolytic cell is connected with the cell body by a lock ring to ensure sealing, and the quartz light window can be replaced quickly and conveniently. 10. The electrolytic cell is often used in three-electrode system, and the volume of the electrolytic cell can be customized from 30ml to 500ml. 11. The electrolytic cell is an absolutely sealed electrolytic cell system. 12. The glass sealing part of the electrolytic cell is designed with an external thread opening, and the inner core is made of 360-degree rotating PTFE, so that the electrode can accurately correspond to the light window, and the outer cover is sealed by tightening the POM material. 13. The electrolytic cell is equipped with an aeration device that can ventilate under the liquid surface, and the atmosphere is carried out according to different experiments. 14. The electrolytic cell can add a sampling port on the cell body, at which time additional costs are required. 15. The electrolytic cell is divided into two types: single-layer and double-layer 16. The layer adds a constant temperature water bath function on the basis of the single layer, and the solution to be tested in the electrolysis cell achieves a constant temperature effect by continuously feeding circulating constant temperature water into the jacket layer of the electrolysis cell.
Introduction: The working principle of the electrolytic cell is to allow the current to pass through the electrolyte solution (or molten electrolyte) and cause a redox reaction at the cathode and anode, so as to realize the conversion of electrical energy into chemical energy.
