C002 Straight five-port electrolytic cell Introduction: The working principle of the electrolytic cell is to allow the current to pass through the electrolyte solution (or molten electrolyte) and cause a redox reaction at the cathode and anode, so as to realize the conversion of electrical energy into chemical energy. Technical features: 1. Tank body material: high borosilicate glass 2. The electrolytic cell is a relatively sealed electrolytic cell system, which is commonly used in three-electrode systems. The volume of the pool ranges from 30ml to 500ml, and can also be customized according to requirements. 3. The glass part of the electrolytic cell is squeezed 0 circles through the thread of the cover to reach the pool and the cover The sealing effect of the electrode part is also achieved by the sealing screw extrusion ring. 4. The electrolytic cell is equipped with sand core salt bridge or Lujin capillary (one of them). 5. The electrolytic cell is equipped with air inlet and outlet, and the air intake contains aeration device, which varies according to the experiment. Protect the atmosphere. 6. The electrolytic cell is a relatively sealed system. For better sealing, please pay attention to C002-2 absolute sealing system. 7. The electrolytic cell is divided into two types: single-layer and double-layer. The double-layer increases on the basis of single-layer. The constant temperature water bath function is added, and the circulation is continuously passed through the jacket layer of the electrolytic cell. The constant temperature water makes the measured solution in the electrolytic cell reach a constant temperature effect. 8. The material of the cover of the electrolytic cell: PTFE, the cover is different according to the volume of the electrolytic cell The size of the sub is different, the diameter of the inner screw cap is basically divided into 35mm, 50mm, 60mm, 70mm 9. The electrolytic cell breaks through the constraints of the traditional five-port electrolytic cell diameter on large platinum sheet electrodes. Lead the electrolytic cell into the era of big mouth. 10. The electrolytic cell can be used with rotating disc electrodes. But the seal of the pool is also Correspondingly affected, the structure of the cover has also been changed, requiring additional costs.
Introduction: The working principle of the electrolytic cell is to allow the current to pass through the electrolyte solution (or molten electrolyte) and cause a redox reaction at the cathode and anode, so as to realize the conversion of electrical energy into chemical energy.
