Introduction: The working principle of the electrolytic cell is to allow the current to pass through the electrolyte solution (or molten electrolyte) and cause a redox reaction at the cathode and anode, so as to realize the conversion of electrical energy into chemical energy. Technical features: 1. Tank body material: high borosilicate glass 2. The electrolytic cell is an absolutely sealed electrolytic cell system, commonly used in a three-electrode system. The volume of the electrolytic cell ranges from 10ml to 500ml, and can also be customized according to requirements. 3. The electrode part of the electrolytic cell realizes the internal insertion and removal of the electrode through the earphone jack on the cover, so that the three-electrode system can be absolutely sealed. 4. The electrodes of the electrolytic cell must be matched with the cell body. 5. The electrolytic cell can not add sand core salt bridge or Lujin capillary, only silver silver chloride electrode can be used. 6. The electrolytic cell realizes atmosphere protection by adding valves and aeration devices, and the valve connected with the aeration device is the direction of air intake. 7. The electrolytic cell is an absolutely sealed system, which can be evacuated (less than -100kpa) or pressurized through the valve. For pressurization, the bottom of the electrolytic cell should be made into a round bottom shape, and the pressure should not be greater than 0.6MPa for safety reasons. 8. Due to the limitation of the process, the glass on the inner wall of the double-layer electrolytic cell is relatively weak, so it is forbidden to pressurize. 9. The electrolytic cell is divided into single-layer and double-layer forms. 10. The double-layer adds a constant temperature water bath function on the basis of the single layer, and the solution to be tested in the electrolysis cell achieves a constant temperature effect by continuously feeding circulating constant temperature water into the jacket layer of the electrolysis cell. 11. Electrolytic cell cover material: PTFE, the size of the cover is different according to the volume of the electrolytic cell, the size of the inner screw cover is basically divided into 50mm, 60mm, 70mm
Introduction: The working principle of the electrolytic cell is to allow the current to pass through the electrolyte solution (or molten electrolyte) and cause a redox reaction at the cathode and anode, so as to realize the conversion of electrical energy into chemical energy.
