Introduction: The BY-101N endoscopic microbial inspection instrument is used in conjunction with the SD11N series endoscopic detection sampler. Use SD110-series endoscopic detection sampler, close the cup after sampling on site, then transfer to the microbiology laboratory, use the BY-101N microbiological tester for suction filtration, so that the microorganisms are trapped on the filter membrane, and counted after cultivation. It is suitable for endoscopic microbial load detection in the medical and health industry. Features: 1. Built-in miniature high-performance diaphragm pump, no need to pump the filter bottle, greatly reducing the occupation of the console space, and more convenient to use; 2. The button switch control with indicator light, the operation is simple and intuitive; 3. Concise internal pipeline, no dead spots where microorganisms can breed, easy to clean and disinfect; 4. The stainless steel casing is mirror-polished, and the surface is smooth and smooth, which is convenient for cleaning and disinfection; Technical Parameters: Applicable consumables: SD11N series endoscopic detection sampler Power supply: AC 220V/50Hz Power: 25W Pump flow: 0.7L/min Noise: ≤60dB (load state) Weight: 2.5kg Dimensions: 25cm×19cm×14cm (length×width×height) Drain hose specification: inner diameter Φ10mm～Φ16mm silicone tube
Introduction: The BY-101N endoscopic microbial inspection instrument is used in conjunction with the SD11N series endoscopic detection sampler. Use SD110-series endoscopic detection sampler, close the cup after sampling on site, then transfer to the microbiology laboratory, use the BY-101N microbiological tester for suction filtration, so that the microorganisms are trapped on the filter membrane, and counted after cultivation. It is suitable for endoscopic microbial load detection in the medical and health industry.
