BWNQ-7B Full automatic freezing point and pour point tester Introduction: This instrument is designed and manufactured in accordance with national standards GB510, ASTM D2386, GB/T3535 and ASTM D97, and is used to measure the pour point of liquid petroleum products. characteristic: 1. It is applicable to determining the pour point and freezing point of lubricating oil and dark petroleum products, and has no limit on viscosity. 2. Wider application. It can be used in power, petroleum, chemical, commodity inspection and scientific research departments. 3. LCD display, touch control, easy to use. 4. It can be heated to 50 ℃ or cooled to - 70 ℃. 5. Automatic detection, automatic printing of results, good repeatability. 6. Automatic tilt during detection, fully in line with the standard. 7. High performance compressor refrigeration, long service life. 8. The test mode is optional, which can be fast or normal. 9. It has the function of fault diagnosis and can prompt for operation. 10. Refrigeration speed and testing standards can be prepared according to customer requirements. Technical parameters: Measuring range: room temperature~- 70 ℃ Measurement accuracy: ± 1 ℃ Resolution: 0.1 ℃ Display mode: LCD Printer: thermal type, 36 characters, Chinese character output Ambient temperature: 5 ℃～ 40 ℃ Relative humidity: ≤ 85% Working power supply: AC220V ± 10% 50Hz Power consumption:<300W Boundary dimension: 400mm * 570mm * 830mm Weight: 66kg
Introduction: This instrument is designed and manufactured in accordance with national standards GB510, ASTM D2386, GB/T3535 and ASTM D97, and is used to measure the pour point of liquid petroleum products.
