1 Sales BT-200 Standard Funnel Method Metal Powder Flow Tester,Manufacturer
Position: Home > > Physical property test > Other physical test instruments > Density meter > BT-200 Standard Funnel Method Metal Powder Flow Tester

BT-200 Standard Funnel Method Metal Powder Flow Tester

Product ID:WLft017

Price: Please inquire PDF Format
Supply Ability:70 SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberBT-200
    Brand NameDANDONGBAITE
    Payment TermsT/T, paypal
    BT-200 Standard Funnel Method Metal Powder Flow Tester
    Introduction
    BT-200 standard funnel method metal powder flow meter (Hall flow meter) is an instrument used to test the flow of metal powder. It complies with national standard GB / T1482-2010 and international standard ISO4490-2008. Any metal powder that can flow freely through a standard funnel with a diameter of 2.5mm can be used for flow testing. Its basic principle is to determine the flowability of the metal powder by measuring the time required for 50g of metal powder to flow through a standard funnel with a diameter of 2.5mm. The shorter the time taken, the better the powder flowability and the longer the time taken The powder has poorer fluidity. If a certain metal powder cannot flow through the 2.5mm pores, or intermittently flows out by tapping lightly, the metal powder should be considered to have no fluidity. 
    Technical Parameters
    Funnel outflow hole 2.5mm
    Balance range 100g, accuracy 0.05g;
    Funnel angle 60 °
    Stopwatch accuracy is 0.2s

  • Introduction
    BT-200 standard funnel method metal powder flow meter (Hall flow meter) is an instrument used to test the flow of metal powder. It complies with national standard GB / T1482-2010 and international standard ISO4490-2008. Any metal powder that can flow freely through a standard funnel with a diameter of 2.5mm can be used for flow testing. Its basic principle is to determine the flowability of the metal powder by measuring the time required for 50g of metal powder to flow through a standard funnel with a diameter of 2.5mm. The shorter the time taken, the better the powder flowability and the longer the time taken The powder has poorer fluidity. If a certain metal powder cannot flow through the 2.5mm pores, or intermittently flows out by tapping lightly, the metal powder should be considered to have no fluidity. 
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
+86-18620722006
instruments@instrumentstrade.com