BT-101 bulk density meter Introduction
BT-101 bulk density tester is a high precision bulk density tester. It is an internationally-specific Scott capacity meter method, manufactured in accordance with GB / T5060-1985 (ISO 3923/2) standard, and is specially used to determine the bulk density of metal powders. Load density test.
There are many methods and standards for measuring the bulk density of powders. Because the density of metal powder is relatively large, if the bulk density test is performed directly by the funnel method like other powders, the impact of the powder falling speed will be faster. The natural accumulation state of the powder is destroyed, which brings a large error to the bulk density test. There are 4 damping plates in the middle of the bulk density meter using the Scott capacity meter method. The falling stream of metal powder will sequentially contact the damping plate, which slows down the falling speed and reduces the impact force, thereby reducing the looseness of metal powder Test error of density. Technical Parameters
Cylindrical cup volume: 25 ± 0.05ml
Balance range: ≥100g
Cylindrical cup material: brass
Balance accuracy: ≤0.05g
Square Funnel Angle: 60 °
Damping plate angle: 25 °
Square funnel hole: 12.5mm × 12.5mm
Screen hole: 1.18mm
Introduction
BT-101 bulk density tester is a high precision bulk density tester. It is an internationally-specific Scott capacity meter method, manufactured in accordance with GB / T5060-1985 (ISO 3923/2) standard, and is specially used to determine the bulk density of metal powders. Load density test.
There are many methods and standards for measuring the bulk density of powders. Because the density of metal powder is relatively large, if the bulk density test is performed directly by the funnel method like other powders, the impact of the powder falling speed will be faster. The natural accumulation state of the powder is destroyed, which brings a large error to the bulk density test. There are 4 damping plates in the middle of the bulk density meter using the Scott capacity meter method. The falling stream of metal powder will sequentially contact the damping plate, which slows down the falling speed and reduces the impact force, thereby reducing the looseness of metal powder Test error of density.
