BSG-800 light incubator Introduction: It mainly provides a stable temperature, humidity and light environment for the test samples, accurately simulates the temperature, humidity and light intensity of day and night and seasonal conditions, and provides users with climatic growth conditions for various plants. It is applicable to seed germination, seedling cultivation, plant growth and tissue culture, plant cultivation and breeding, model organism culture, etc. characteristic: 1. The shell is made of cold-rolled steel plate, with electrostatic spraying on the surface, stainless steel tank mirror, and the shelf can be adjusted at will; 2. Adopt PMMA II operating system, LCD display temperature, time, illumination, and over temperature alarm function; 3. Amplitude flow air supply and improvement of convection circulation form to ensure the fluidity and temperature uniformity of air at each layer; 4. Equipped with glass observation inner door; 5. The top of the box is equipped with a detection port connector, with an inner diameter of 30mm and an outer diameter of 60mm; 6. The compressor, circulating air duct and fluorine free refrigerant of international famous brand are used to lead the environmental protection, high efficiency and energy conservation; 7. Integrated refrigeration system, multi-layer protection, safe operation, effective self verification, and the use of unconventional automatic frost that can not consume energy, to avoid the impact on temperature, so that the equipment can be used continuously for a long time; 8. Standard mechanical lock to prevent random door opening; 9. The independent fresh air device can be used to open and close the air in the regulating box at any time to keep the air in the box fresh; 10. Programmable programming, 30 segments of 99 cycles can be set; 11. The illuminance is adjustable at six levels, and the three-dimensional light distribution mode is adopted to improve the uniformity; 12. Equipped with RS-485 interface; 13. It has the function of parameter memory and call recovery for data loss protection due to power failure and crash. Technical parameters: Model: BSG-800 Temperature control range: 0-60 ℃ without light, 10-60 ℃ with light Resolution: 0.1 ℃ Fluctuation: ± 0.5 ℃ Uniformity: ± 2 ℃ (at 37 ℃) Light intensity: 0-15000Lx (adjustable in six levels) Input power: 3300W Timing range: 0-9999 minutes Tank size (mm): 1220 × five hundred and eighty-five × one thousand one hundred and twenty-three Overall dimension (mm): 1633 × nine hundred and ten × one thousand eight hundred and twenty Load carrier [standard configuration/maximum]: 6/12 pieces Freight information: Gross weight (kg): 450 Net weight (kg): 410 Outer package size (mm) × wide × Height: 1770 × one thousand and ninety × two thousand and forty
Introduction: It mainly provides a stable temperature, humidity and light environment for the test samples, accurately simulates the temperature, humidity and light intensity of day and night and seasonal conditions, and provides users with climatic growth conditions for various plants. It is applicable to seed germination, seedling cultivation, plant growth and tissue culture, plant cultivation and breeding, model organism culture, etc.
