BL-6178-AL laboratory small floor blown film machine
Introduction: Extrusion blown film refers to a bi-fold plastic film obtained by continuously extruding a plastic melt through a die under a certain temperature and a certain shearing force, which is inflated by compressed air, cooled by air ring and driven by frequency conversion. crafting process. The laboratory small floor blown film machine is mainly used to detect the blown film feasibility of the polymer material and the gel condition in the material, as well as the dispersibility of the colored dispersion, the control mixture and the extrudate. Technical Parameters: Single screw extruder Barrel screw diameter: Φ20mm Plastic materials: PELDPE HDPE Barrel screw material: 38CrMoAlA Barrel heating method: electric heating Motor power: 0.75kw Speed control mode: frequency control Production line output (theoretical value): 0.5-1kg/h Blowing Machine Mold caliber: Φ30mm Blown film width: 75--110mm Traction roller diameter: Φ 65mm Traction roller length: 200mm Traction roller drive: independent drive Winding motor: torque motor Winding station: single station Blown film width: 75-110mm Power: 220V, single phase, 50HZ (220V, 1PHASE, 50HZ) Equipment dimensions: 1360 × 580 × 1360mm (W × D × H) Net weight of equipment: 150kg
Introduction: Extrusion blown film refers to a bi-fold plastic film obtained by continuously extruding a plastic melt through a die under a certain temperature and a certain shearing force, which is inflated by compressed air, cooled by air ring and driven by frequency conversion. crafting process. The laboratory small floor blown film machine is mainly used to detect the blown film feasibility of the polymer material and the gel condition in the material, as well as the dispersibility of the colored dispersion, the control mixture and the extrudate.
