Introduction: The hydrogenation test device is suitable for petrochemical enterprises, research institutes, universities and colleges for the hydrorefining of light and heavy petroleum distillates and chemical raw materials, hydrocracking, hydrogen depressing, paraffin hydrogenation, lubricating oil hydrogenation, slag Research work on oil hydrotreating process and catalyst evaluation. The device scale is 2ml, 10 ml, 30 ml, 100 ml, 500 ml, 3000 ml and 7000 ml. It is also possible to design and manufacture a side wire test device. 2ml, 10 ml, 30 ml test equipment is suitable for catalyst screening, and equipment of 100 ml and above is suitable for catalyst evaluation, catalytic performance verification, catalyst life inspection, hydrogenation process condition test and optimization. The device adopts computer automatic control, and the software is designed according to the requirements of device control, easy to operate, stable and reliable in operation, and high in control precision. Features: 1. The 100 ml test unit consists of two parallel units, each of which is equipped with two reactors, either one for the hydrofining test or two for the hydrocracking test. 2. The process flow of the 500 ml, 3000 ml and 7000 ml test units simulates the actual process of the industrial production unit and can be operated in full cycle. 3. The reactor electric furnace is uniquely designed to control the isothermal bed and the adiabatic bed of the reactor, and can be flexibly used according to the process requirements. 4. The operation of the device is all imported high-end PLC/DCS control system. The control circuit is provided with control modes such as manual control, automatic control, and program automatic rise (lower) control to ensure stable operation and high control precision. The detection and control points are equipped with over-limit alarm and ultra-high-limit power-off protection function, which is safe and reliable. 5. The data report format can be designed according to user requirements. The specific details of the test data processing and control system can be designed according to the user's requirements. Technical Parameters: 1. Raw material oil: gasoline, diesel, VGO, paraffin, residual oil, F-T synthetic oil, etc. 2. Maximum operating pressure: 20Mpa; / Control accuracy: ± 0.1 Mpa 3. Maximum operating temperature of the reactor: 500 ° C; / control accuracy: ± 1 ° C 4. Feed quantity control accuracy: ≤1%F.S. 5. New hydrogen flow control accuracy: ± 1% F.S. 6. Cyclic hydrogen flow control accuracy: ± 1% F.S. 7. Insulation temperature: room temperature -150 ° C; / control accuracy: ± 1 ° C 8. Liquid level control accuracy: ±2mm 9. New hydrogen flow and exhaust gas flow: Online measurement and cumulative flow.
Introduction: The hydrogenation test device is suitable for petrochemical enterprises, research institutes, universities and colleges for the hydrorefining of light and heavy petroleum distillates and chemical raw materials, hydrocracking, hydrogen depressing, paraffin hydrogenation, lubricating oil hydrogenation, slag Research work on oil hydrotreating process and catalyst evaluation. The device scale is 2ml, 10 ml, 30 ml, 100 ml, 500 ml, 3000 ml and 7000 ml. It is also possible to design and manufacture a side wire test device. 2ml, 10 ml, 30 ml test equipment is suitable for catalyst screening, and equipment of 100 ml and above is suitable for catalyst evaluation, catalytic performance verification, catalyst life inspection, hydrogenation process condition test and optimization. The device adopts computer automatic control, and the software is designed according to the requirements of device control, easy to operate, stable and reliable in operation, and high in control precision.
