Biolot 200 protein purification system Introduction: Our company specializes in producing protein purification systems. The Biolot series of protein purification systems is a simple and efficient protein purification chromatography system that can be used for rapid purification of target products such as proteins, peptides, and nucleic acids from milligrams to gram levels. The hardware of the Biolot system consists of a PEEK pump, a sample loading pump, a UV detector, a conductivity/pH detector, an automatic fraction collector, a mixer, and a valve. It is used in conjunction with Bioview software, chromatography columns, and fillers, and the instrument can meet any purification challenge. The system configuration is flexible, supports various chromatography technologies, and meets the development requirements of customers from small-scale to pilot purification processes. Features: 1. It can quickly separate biological macromolecular compounds such as proteins and peptides 2. Highly flexible modular configuration makes the research process more intuitive 3. Adopting high-precision plunger pump, high stability, and low pulse 4. High sensitivity online detection, optional with multiple detectors such as UV, PH, conductivity, differential refractive index, etc 5. The flow path is made of PEEK material, which has good biocompatibility 6. The pump head has an automatic cleaning function to avoid residual buffer solution and crystallization precipitation 7. Fully automatic fraction collector, with multiple collection modes and the ability to configure multiple specifications of collection tubes 8. Standard gradient program, customers can reset according to experimental needs 9. Storage and execution of chromatographic separation methods 10. Highly intelligent operating system, simple and convenient to use 11. Control software complies with FDA 21 CFR Part 11 certification requirements Technical parameters: Model: Biolot 200 System pump: PEEK high-pressure chromatography pump (high-precision, gradient design, biocompatible) Flow rate range: 0.01-200ml/min Flow velocity accuracy: ± 0.5% Pressure range: 0-5Mpa Pressure pulsation: ≤ 0.2MPa Gradient types: steps, linearly changing gradients, and gradients that can be modified online Minimum gradient adjustment: ± 0.5% ABS (dual pump) Detector light source: imported deuterium lamp+tungsten lamp (system automatically switches light source) Detection wavelength: 190-800nm (simultaneous detection of two wavelengths) Wavelength accuracy: ± 1nm Absorbance range: -3-3AU (linear 0-2 AU) Conductivity range: 0-999.9ms/cm PH range: 0-14 Collector: Fully automatic fraction collector Collection pipe rack: 2 x 60 test tubes (height 150mm, diameter 15mm) Collection modes: Normal mode, sequential collection, and cyclic collection Manual sampling valve: standard 1ml quantitative ring (various specifications of quantitative rings can be optionally equipped) Power supply: 85-264VAC, 50Hz
Introduction: Our company specializes in producing protein purification systems. The Biolot series of protein purification systems is a simple and efficient protein purification chromatography system that can be used for rapid purification of target products such as proteins, peptides, and nucleic acids from milligrams to gram levels. The hardware of the Biolot system consists of a PEEK pump, a sample loading pump, a UV detector, a conductivity/pH detector, an automatic fraction collector, a mixer, and a valve. It is used in conjunction with Bioview software, chromatography columns, and fillers, and the instrument can meet any purification challenge. The system configuration is flexible, supports various chromatography technologies, and meets the development requirements of customers from small-scale to pilot purification processes.