Introduction: The BF-08 fuel colloid content tester is designed and manufactured in accordance with the GB/T 8019-2008 standard. It can accurately describe the actual colloid of aviation fuel, motor gasoline and other volatile fractions (including alcohols, Ether oxygen-containing compounds and sediment inhibitor products) in the test of the determination of the colloidal content. BF-08 Fuel Gum Content Analyzer has beautiful and generous appearance design, reasonable structure design, convenient operation and accurate result determination. The BF-08 fuel colloid content tester uses a digital intelligent temperature control meter to control the temperature of the metal evaporation bath, with high temperature control accuracy. The main body of the evaporation bath of BF-08 fuel colloid content tester is made of aluminum. There is a spiral air path in the aluminum bath. Air (the air compressor is connected to the air inlet of the compressed air purifier through a connecting pipe, and then comes out from the compressed air purifier. The air port is connected to the air inlet of the aluminum bath through a connecting pipe.) The air inlet enters the air outlet through the spiral pipe and sprays into the beaker for testing; there are two holes above the aluminum bath, the front hole is inserted into the thermometer, the rear hole is inserted into the sensor ; The air inlet is under the aluminum bath, equipped with a pressure gauge and a flow meter, which can be adjusted after ventilation (the flow rate at room temperature is 600ml/s ±0 90 ml/s); there is a convenient thermometer fixture above the aluminum bath, It can move up and down and rotate 360 degrees, which can easily detect the temperature of each bath hole. Technical Parameters: 1. Power supply: AC 220V±10%/50 HZ 2. Heating power of evaporation bath: 2000W 3. Number of test holes: three holes 4. Outlet flow rate: 1000±150 ml/sec
Introduction: The BF-08 fuel colloid content tester is designed and manufactured in accordance with the GB/T 8019-2008 standard. It can accurately describe the actual colloid of aviation fuel, motor gasoline and other volatile fractions (including alcohols, Ether oxygen-containing compounds and sediment inhibitor products) in the test of the determination of the colloidal content. BF-08 Fuel Gum Content Analyzer has beautiful and generous appearance design, reasonable structure design, convenient operation and accurate result determination.
