BetterPyc 380 multifunctional true density instrument Introduction: The BetterPyc 380 multifunctional true density instrument is developed by Dandong Baite Instrument Co., Ltd. and is equipped with the computer operating software EasyPyc. It is used to test the volume, density, solid content, and porosity of samples. It has the advantages of versatility, high automation, convenient operation, fast speed, high accuracy, and good repeatability. Simply operate the true density meter software and input sample information and testing conditions according to requirements to automatically test sample volume, density, solid content or porosity, and output comprehensive analysis results. The BetterPyc 380 is designed based on the gas displacement method, which is currently globally recognized for testing sample volume or density. Using the gas displacement method, samples are added to the sample chamber, sealed, and analyzed gas is introduced to measure the pressure of the sample chamber. Then, the expansion valve is opened to diffuse the gas into the expansion chamber, and the equilibrium pressure is measured. According to the gas law, the true volume of the sample is obtained, and the sample density, porosity, or solid content are calculated. Technical parameters: long × wide × Height: 345 mm × 297 mm × 221 mm Volume: 100 cm3 Voltage: 100-240 VAC Frequency: 50/60 Hz Adapter: Input: 100-240 VAC; 50/60 Hz Output: 24 V; 5.0 A ； 120 W Max Accuracy: better than 0.1% Status: solid, powder, liquid, slurry, etc Volume: 0~100 cm3 Air pressure: 0-22 psig (0-152 kPag) Type: 99.995% nitrogen or helium Air intake method: flow, vacuum Connecting pipe: Φ 4 m m Temperature: 15~50 ℃ Humidity: 20-80% Workbench: 100 cm × 600 cm Accuracy: 0.03% Repeatability: 0.01% Resolution: 0.0001 g/cm3 Single measurement: less than 3 minutes Operating system: Windows 7 or above Interface: USB
Introduction: The BetterPyc 380 multifunctional true density instrument is developed by Dandong Baite Instrument Co., Ltd. and is equipped with the computer operating software EasyPyc. It is used to test the volume, density, solid content, and porosity of samples. It has the advantages of versatility, high automation, convenient operation, fast speed, high accuracy, and good repeatability. Simply operate the true density meter software and input sample information and testing conditions according to requirements to automatically test sample volume, density, solid content or porosity, and output comprehensive analysis results. The BetterPyc 380 is designed based on the gas displacement method, which is currently globally recognized for testing sample volume or density. Using the gas displacement method, samples are added to the sample chamber, sealed, and analyzed gas is introduced to measure the pressure of the sample chamber. Then, the expansion valve is opened to diffuse the gas into the expansion chamber, and the equilibrium pressure is measured. According to the gas law, the true volume of the sample is obtained, and the sample density, porosity, or solid content are calculated.
