AYAN-B200S thin film evaporator Introduction: Thin film evaporation is an efficient liquid-liquid separation method, which mainly consists of a heating jacket, an internal rotating scraper, a condenser, and a vacuum system. In a high vacuum state, the feed liquid enters from the upper part of the evaporator, and under the action of gravity and rotating scraper, a rotating thin film is formed along the inner wall of the evaporator. By utilizing the different boiling points between materials, the distillate is discharged from the bottom into the heavy fraction receiver, and the secondary steam is discharged from the upper part into the light fraction receiver through the condenser, thus completing the entire separation process. Film evaporation is applicable to the separation of materials and liquids with high viscosity, easy crystallization, easy scaling, suspended solids or heat sensitivity. It is widely used for product pretreatment and fine processing in chemical, pharmaceutical, health care products, cosmetics, perfume and other industries. Features: Made of high-quality 316 and 304 stainless steel, with high stability and long instrument life; Short range distillation, with a short residence time for the material (separation can be successful in a few seconds); High vacuum degree, low distillation temperature, and high distillation efficiency; Can be continuously distilled without interruption; Multiple models are available for selection, suitable for small-scale experiments, pilot production, or large-scale production, Customizable services, providing a complete set of services; Plug and play, automated distillation, simple operation; Technical parameters: Product model: AYAN-B200S Inner diameter (mm): 200 Evaporation area (㎡): 0.35 Condensing area (㎡): 0.5 Feed volume (L): 5 Processing flow rate L/H: 1.5-10.0 Motor power (W): 120 Maximum speed (r/min): 450 Receiving bottle L: 5L Cold well: Yes External condensing device: optional Cooling device: Yes Vacuum degree (pa):<10Pa Heating temperature (℃): 200
Introduction: Thin film evaporation is an efficient liquid-liquid separation method, which mainly consists of a heating jacket, an internal rotating scraper, a condenser, and a vacuum system. In a high vacuum state, the feed liquid enters from the upper part of the evaporator, and under the action of gravity and rotating scraper, a rotating thin film is formed along the inner wall of the evaporator. By utilizing the different boiling points between materials, the distillate is discharged from the bottom into the heavy fraction receiver, and the secondary steam is discharged from the upper part into the light fraction receiver through the condenser, thus completing the entire separation process. Film evaporation is applicable to the separation of materials and liquids with high viscosity, easy crystallization, easy scaling, suspended solids or heat sensitivity. It is widely used for product pretreatment and fine processing in chemical, pharmaceutical, health care products, cosmetics, perfume and other industries.
