ATR8500 Fully Automatic Raman Spectroscopic Imager Introduction: The ATR8500 series of Raman microscopy spectrometers integrates two lasers and combines the advantages of both microscopes and Raman spectrometers. The Raman microscopy detection platform makes it possible to "what you see is what you see", and the precise positioning of Raman visualization The detection platform allows the observer to detect the Raman signals of different surface states on the sample, and can simultaneously display the micro-area morphology of the detected position on the computer, which greatly facilitates the Raman micro-area detection. The full range of ATR8500 can perform automatic focusing, automatic scanning, one-key operation, batch experiment, uniformity scanning, etc., without waiting, and high-reliability scanning imaging Raman data can be obtained; The ATR8500 is equipped with an objective lens specially designed for the Raman system, which makes the laser spot close to the diffraction limit, and then the focus information is accurately and intuitively displayed on the computer through a 5 million camera. It overcomes the problem that the focal plane of the Raman signal collected in the ordinary Raman system is slightly higher or lower than the actual optimal focal plane, thereby improving the quality of the Raman spectrum. The ATR8500 perfectly solves the loss of the camera imaging time path, and realizes the separation of camera imaging and Raman signal collection, so as to obtain the best signal intensity. At the same time, the ATR8500 uses high-performance Raman optimized specifically for the Raman microscopy system. Whether it is sensitivity, signal-to-noise ratio, stability, etc., it is the industry's leading level, providing a strong guarantee for Raman research. Product application: Nanoparticles and new materials; research by scientific research institutes; biological sciences; forensic medicine identification; materials science; medical immunoassay; agricultural and food identification; water pollution analysis. Features: 1. Fully automatic Raman imaging experiment, auto focus, auto scan; 2. Ultra-large range imaging (50X50mm), automatic image stitching; 3. Support up to 3 kinds of excitation wavelength Raman; 4. Ultra-depth of field imaging function (optional); 5. Ultra-high sensitivity, signal-to-noise ratio>6000:1 6. True focus, to ensure more accurate Raman images 7. Ultra-high spatial resolution 8. Unique software control to switch light path 9. Quick positioning, quickly find the focus position 10. High-quality objective lens, micron-level light spot 11. 5 million cameras, clear and accurate images 12.USB2.0 interface directly connected to the computer Technical parameter: Microscope camera system: 5 million pixel industrial camera Focusing method: Conjugate focus Laser spot diameter: >1μm Laser stability: σ/μ <±0.2% Communication mode: USB2.0 Moving range: 50 X 50 mm Moving resolution: 0.1 μm Positioning accuracy: 1 μm Scanning speed: 20 mm/s Focus accuracy: ≤ ±0.2 μm Maximum stroke: 20 mm Focus speed: no more than 10 s
Introduction: The ATR8500 series of Raman microscopy spectrometers integrates two lasers and combines the advantages of both microscopes and Raman spectrometers. The Raman microscopy detection platform makes it possible to "what you see is what you see", and the precise positioning of Raman visualization The detection platform allows the observer to detect the Raman signals of different surface states on the sample, and can simultaneously display the micro-area morphology of the detected position on the computer, which greatly facilitates the Raman micro-area detection. The full range of ATR8500 can perform automatic focusing, automatic scanning, one-key operation, batch experiment, uniformity scanning, etc., without waiting, and high-reliability scanning imaging Raman data can be obtained; The ATR8500 is equipped with an objective lens specially designed for the Raman system, which makes the laser spot close to the diffraction limit, and then the focus information is accurately and intuitively displayed on the computer through a 5 million camera. It overcomes the problem that the focal plane of the Raman signal collected in the ordinary Raman system is slightly higher or lower than the actual optimal focal plane, thereby improving the quality of the Raman spectrum. The ATR8500 perfectly solves the loss of the camera imaging time path, and realizes the separation of camera imaging and Raman signal collection, so as to obtain the best signal intensity. At the same time, the ATR8500 uses high-performance Raman optimized specifically for the Raman microscopy system. Whether it is sensitivity, signal-to-noise ratio, stability, etc., it is the industry's leading level, providing a strong guarantee for Raman research. Product application: Nanoparticles and new materials; research by scientific research institutes; biological sciences; forensic medicine identification; materials science; medical immunoassay; agricultural and food identification; water pollution analysis.
