Introduction: The ATG1020 deuterium lamp light source adopts the deuterium lamp bulb of Hamamatsu Company of Japan, which can produce a stable output spectrum of 180-400nm. Its peak-to-peak stability is less than 0.005%, and its drift is only ±0.5%/h. The tungsten halogen lamp adopts long-life, high-stability bulbs produced by Osram, with a service life of up to 5000 hours; and adopts a self-designed high-reliability constant current drive current. ATG1020 has the characteristics of long life, low light attenuation, and high output power. It can be widely used in traditional desktop spectrometers and field portable micro spectrometers. The ATG1020 deuterium lamp light source can be equipped with a cuvette holder, which can directly perform the transmission and absorption of the cuvette or filter. Features: 1. Full wavelength output: 180-2500 nm 2. Covers deep ultraviolet, ultraviolet, visible, near infrared and other wavelengths; 3. Excellent performance: ultra-stable light source output with peak-to-peak stability less than 0.005%. 4. Optical fiber or free space output: ATG1020 supports free space or optical fiber output (SMA905 interface), which is convenient for connection with spectrometer, optical fiber and other measurement accessories. 5. Long life: Deuterium lamp: 3000 hours; Tungsten halogen lamp: 5000 hours; 6. Optical fiber: It is recommended to use UV resistant quartz optical fiber produced by Aopu Tiancheng. Applications UV flue gas analyzer Research laboratory Multi-parameter water quality analysis Environmental protection equipment Technical Parameters: Size (H): 80 mm x 175 mm x 140 mm Weight: 3 kg (not including power cord) Wavelength range: 180-2500 nm (deep ultraviolet deuterium lamp) Peak-to-peak stability: <0.005% at 250 nm Drift: +/-0.5% per hour at 250 nm 40 minutes Deuterium lamp power: 30 W Lamp life: 3000 hours Tungsten halogen lamp power: 5 W Lamp life: 5000 hours Warm-up time: 15 minutes Working temperature: -10 ℃-40 ℃ Humidity: 5-95% non-condensing Optical output: SMA905 standard optical fiber interface Voltage and power: 85-264 V, 50/60 Hz; 60 W
Introduction: The ATG1020 deuterium lamp light source adopts the deuterium lamp bulb of Hamamatsu Company of Japan, which can produce a stable output spectrum of 180-400nm. Its peak-to-peak stability is less than 0.005%, and its drift is only ±0.5%/h. The tungsten halogen lamp adopts long-life, high-stability bulbs produced by Osram, with a service life of up to 5000 hours; and adopts a self-designed high-reliability constant current drive current. ATG1020 has the characteristics of long life, low light attenuation, and high output power. It can be widely used in traditional desktop spectrometers and field portable micro spectrometers. The ATG1020 deuterium lamp light source can be equipped with a cuvette holder, which can directly perform the transmission and absorption of the cuvette or filter.
