Brief introduction: AT100 leeb hardness tester is a new type of portable hardness testing instrument, mainly is suitable for the testing the hardness of metal materials, has the high testing precision, small volume, easy to operate, convenient to carry, the characteristics of wide measurement range. Hardness tester is based on the magnitude on the Richter scale (Dietmar Leeb) hardness testing principle designed, measured on the Richter scale through the program automatically converted into brinell hardness value, rockwell, vickers, shore hardness value, also can configure all kinds of test accessories, to meet the various test conditions and the environment. Features: 1. The test system of six kinds of hardness (HV, HRC, HRB, HB, HV, HS) 2. One can impact with a variety of different devices at the same time, the DC, D (D + 15, C, DL, G) 3. Automatic identification impact device types (D, DC + 15, C, D, DL, G) Hardness value is 4. Can be set up and deviation automatic voice alarm 5. Can store 600 largest group (impact number 32 ~ 1) hardness measurement data 6. Automatically detect the battery voltage, when the working voltage is lower than the rating, automatic alarm 7. Using 2 AA battery (5), can work continuously not less than 150 hours 8. With functions of software value for calibration Technical parameters: Hardness system: on the Richter scale, brinell, rockwell B, rockwell, vickers, shore C Measuring range: HLD HLD (170 ~ 960) Measuring direction: 360 ° Relative error of plus or minus 0.8%, repeatability error value for 0.8 (HLD = 800) Standard impact device: D impact device Measuring the curvature radius of workpiece: Rmin = 50 mm (with different bearing ring Rmin = 10 mm) Maximum hardness measurement artifacts: 940 hv (D/DC 15 / / DL/D + C impact device) Display: 128 x 64 graphic dot matrix LCD Data storage: 600 group (impact number 32 ~ 1) Working voltage: 2 x 1.5 V regular alkaline batteries Continuous working time: about 100 h
Brief introduction: AT100 leeb hardness tester is a new type of portable hardness testing instrument, mainly is suitable for the testing the hardness of metal materials, has the high testing precision, small volume, easy to operate, convenient to carry, the characteristics of wide measurement range.
