Introduction: AT-180B belt tension meter during measurement and adjustment, the belt tension is displayed on the instrument in real time. At the same time, there are indicator lights and different sounds to indicate whether the tension is within or outside the set value. This provides the user with information when adjusting the belt tension. For convenience, there is no need to stare at the display value of the instrument at all times. The instrument can automatically store the upper and lower limits of the belt tension, the measurement unit and the calibration result, and the data will not be lost even if the power is turned off or the battery is removed. It is mainly used to measure the tension of automobile belts, and can also be used to measure the tension data detection and adjustment of belt-shaped, wire-shaped, linear, net-shaped and wide objects. Suitable for industries such as automobile, textile chemical fiber, wire and cable, metal wire, plastic film, paper, printing, film and so on. Features: 1. Conversion of metric/imperial units. 2. With automatic shutdown and manual shutdown functions. 3. It has the function of maximum value latch and undervoltage alarm indication. 4. Use USB data cable to output and communicate with PC. 5. Provide Bluetooth data output options. Technical Parameters: Resolution: ±1N (or 1 other unit) Accuracy: ≤±5% Measuring range: 0-750N, 0~120lb, 0~77Kg, 0~114Seems Belt status indication: Low, OK, Hi (low, OK, high) Belt width: ≤36mm Overload alarm: 750N (Newton) Maximum load: 850N (Newton) Working environment: temperature 0 ～50℃ Humidity <85% RH Power supply: 4x1.5v AAA AAA battery Host size: 140×70×30mm Host weight: 130g (without battery) Probe weight: 230g
Introduction: AT-180B belt tension meter during measurement and adjustment, the belt tension is displayed on the instrument in real time. At the same time, there are indicator lights and different sounds to indicate whether the tension is within or outside the set value. This provides the user with information when adjusting the belt tension. For convenience, there is no need to stare at the display value of the instrument at all times. The instrument can automatically store the upper and lower limits of the belt tension, the measurement unit and the calibration result, and the data will not be lost even if the power is turned off or the battery is removed. It is mainly used to measure the tension of automobile belts, and can also be used to measure the tension data detection and adjustment of belt-shaped, wire-shaped, linear, net-shaped and wide objects. Suitable for industries such as automobile, textile chemical fiber, wire and cable, metal wire, plastic film, paper, printing, film and so on.
