Introduction: AT-135A/B stroboscope is used in the speed and movement frequency (printing bag) of the detected object (for example: motor). The stroboscope can also be used to analyze the vibration of the object, the action of high-speed moving objects, and high-speed photography. Features: 1. Digital display, no parallax; wide measurement range, high resolution. 2. Automatically stop flashing and other functions to save electricity and increase the service life of strobe lights. 3. Internal trigger/external trigger selection for fast conversion; double frequency and half frequency fast frequency modulation function. 4. In the external trigger mode (using photoelectric signal), it can realize the automatic tracking function of the pattern. 5. Using microcomputer technology, flashing technology and anti-interference technology and many other advanced technologies, the speed value can be accurately measured without contact. Technical Parameters: Resolution: 0.1FPM (below 1000FPM) 1FPM (above 1000FPM) Test range: AT-135A: 50~12000FPM AT-135B: 50~40000FPM Measurement accuracy: ±(0.05%n+1d) Sampling time: 0.3 seconds Internal trigger/external trigger: free conversion External trigger signal amplitude: TTL level Fast frequency modulation: ×2, ÷2 High and low range: convertible When the low range is selected, the flash brightness is high When the high range is selected, the flash brightness is low Normal working conditions: no corrosive gas and strong electromagnetic field Ambient temperature: 0℃-40℃ Relative humidity: less than 85%RH Flash tube life: 100 million times Power supply: AC 220 ± 10%V, 2A, 50Hz; AC 110 ±10%V, 2A, 50HZ Power consumption: about 50W Size: 210x85x185mm Weight: 660g
Introduction: AT-135A/B stroboscope is used in the speed and movement frequency (printing bag) of the detected object (for example: motor). The stroboscope can also be used to analyze the vibration of the object, the action of high-speed moving objects, and high-speed photography.
