Introduction: The ASLI packaging vibration impact testing machine can perform the impact test measurement and control of the battery group in each state (X+Y+Z) triaxial directions as well as the state of charge (discharge, capacity) of its constant current discharge during dynamic and static conditions. The entire set of discharges and single-section detection are integrated, and the entire discharge detection process is automatically completed, which is fully intelligent. The ASLI packaged vibration impact testing machine possesses high reproducibility, high accuracy, simple software operation, and saves four standard measurement channels for personnel training time. The impact data and waveforms can be saved, production reports, and print output functions are selected according to requirements. Suitable for models, specifications and accept special orders. Features: 1 Each type of impact testing machine and mechanism are all design patents, accurate and error-free operation 2 Comply with all commercial and military test specifications 3 High reliability, simple maintenance procedures 4 wave type: half-sine wave, square wave, sawtooth wave speed change rate wide range 5Free fall of classical mechanics, simulating the actual environment*accurate, true impact collision, no secondary reversal or 6 shift Waveform transformation adjustment method is fast and can be used with impact amplifiers. 7 high acceleration up to 100,000g 8 Dedicated shock-absorbing airbags and vibration damping feet, effectively absorbing natural displacement during testing 9 Machines need no concrete or special fixtures. Technical Parameters: Workbench under test load: 70KG, can test 2 groups of batteries, each group contains 2 batteries (subject to provide physical samples) Table size: 800mm×800mm Impact direction: (X+Y)+Z Shock pulse waveform: (half-sine wave, trapezoidal wave, post-peak sawtooth wave) Half sine wave: 100～5000m/s2 Trapezoidal wave: 150 to 1000m/s2 After the peak sawtooth: 150 ~ 1000m/s2 Speed variation tolerance: ≤±15% Speed change: 4.2m/s Peak* large acceleration: 300m/s^2 (30gn); Packaging vibration impact tester pulse duration: Half sine wave: 2 ~ 40ms Ladder wave: 6~25ms After the peak sawtooth: 6 ~ 20ms Impact distance: 0-520mm, and impact distance can be set Drop height automatic adjustment range: 0-200 mm Large impact speed change (m/s): No load: 9.0m/s, * Large load: 6.3 m/s Frequency automatic adjustment range: 0-100 times/minute
Introduction: The ASLI packaging vibration impact testing machine can perform the impact test measurement and control of the battery group in each state (X+Y+Z) triaxial directions as well as the state of charge (discharge, capacity) of its constant current discharge during dynamic and static conditions. The entire set of discharges and single-section detection are integrated, and the entire discharge detection process is automatically completed, which is fully intelligent. The ASLI packaged vibration impact testing machine possesses high reproducibility, high accuracy, simple software operation, and saves four standard measurement channels for personnel training time. The impact data and waveforms can be saved, production reports, and print output functions are selected according to requirements. Suitable for models, specifications and accept special orders.
