Introduction: Hall flowmeter used to determine the powder flow rate and bulk density. For free-flowing metal powder and other powder measurements. The measurement is done with a calibrated Hall-rate funnel. The funnel aperture 2.5 mm, the inclination of 60 degrees. These dimensions are clearly defined by international and domestic standards. Meeting the United States Section production AS-300M economical Hall anemometer and AS-300A automatic Hall anemometer. AS-300A automatic Hall meter can automatically measure the flow rate of metal powder. In addition, it can also measure the bulk density of metal powder. The product meets the research and testing staff for a higher flow rate and bulk density requirements, is widely used in various industrial fields. The instrument uses a sensor to sense the flow of powder and automatically stops when the measurement is over and displays the result. Completely avoiding the human error on the measurement accuracy and repeatability, saving a lot of operator valuable time. Features: Hall funnel to meet the requirements of international and domestic standards. Hall funnel imported standard powder emery calibration. Density measuring cup in accordance with international standards for calibration. Real-time display of mobile time. Automatic measurement, automatic stop. LED display measurement results. Technical Parameters: Physical property measurement 1: Flow rate Measurement of physical properties 2: bulk density The required sample size: 50 grams Timing range: 1-9999 seconds Instrument size: length 33 x width x 31 x height 23 cm Weight: 16 kg
Introduction: Hall flowmeter used to determine the powder flow rate and bulk density. For free-flowing metal powder and other powder measurements. The measurement is done with a calibrated Hall-rate funnel. The funnel aperture 2.5 mm, the inclination of 60 degrees. These dimensions are clearly defined by international and domestic standards. Meeting the United States Section production AS-300M economical Hall anemometer and AS-300A automatic Hall anemometer. AS-300A automatic Hall meter can automatically measure the flow rate of metal powder. In addition, it can also measure the bulk density of metal powder. The product meets the research and testing staff for a higher flow rate and bulk density requirements, is widely used in various industrial fields. The instrument uses a sensor to sense the flow of powder and automatically stops when the measurement is over and displays the result. Completely avoiding the human error on the measurement accuracy and repeatability, saving a lot of operator valuable time.
