Introduction: AS-120T-5 textile hardness tester is used to measure the winding density (hardness) of textile bobbins, warp beams, reels, cones, dyeing bags, etc. In order to measure the hardness, the outer ring of the spring-loaded housing is pressed down until the edge of the ring matches the measured object. This ensures a constant pressure and prevents measurement errors. The principle used to measure fabric stiffness is based on measuring the penetration resistance of a ball to a spool under a known spring load. The measurement principle is the same as the Shore A hardness test. Features: 1. Convertible probe, the curved end of the probe is used for bobbins with a diameter less than or equal to 400mm, and the flat end of the probe is suitable for bobbins with a diameter greater than 400mm. 2. Average value calculation, maximum value latch, under-voltage alarm indication function. 3. Use USB data cable to output and communicate with PC. 4. Provide Bluetooth data output options. Technical Parameters: Model: AS-120T-5 Display parameters: Hardness value/average value/maximum value Indenter: spherical 5mmΦ Convertible probe: The curved end of the probe is used for bobbins with a diameter less than or equal to 400mm, and the flat end of the probe is suitable for bobbins with a diameter greater than 400mm. Scope of application: Used for loosely wound synthetic fiber bobbins and tightly wound natural fibers, yarns and threads Display range: 0~100H (hardness scale line) Measuring range: 10~90H (hardness scale line) Accuracy: ≤±1H Resolution: 0.1H Low voltage prompt: √ Automatic shutdown function: √ Indentation depth: 0~2.5mm Measuring pressure: about 12.5N Measuring spring force: 0.55~8.065N Indenter diameter: 51mm Spherical radius of working surface: 55mm (when measuring with the curved end of the probe) Working plane: 45mmΦ (when measuring with the flat end of the probe) Working environment: temperature 0~40°C; humidity <80%RH Power supply: 2x1.5v AAA AAA batteries Size: 178×65×45mm Weight: 290g (without batteries)
AS-120T-5 Textile Hardness Tester Introduction: AS-120T-5 textile hardness tester is used to measure the winding density (hardness) of textile bobbins, warp beams, reels, cones, dyeing bags, etc. In order to measure the hardness, the outer ring of the spring-loaded housing is pressed down until the edge of the ring matches the measured object. This ensures a constant pressure and prevents measurement errors. The principle used to measure fabric stiffness is based on measuring the penetration resistance of a ball to a spool under a known spring load. The measurement principle is the same as the Shore A hardness test.
