Aode-101 rotary sampler Introduction: The rotary sampler is composed of two main parts: an automatic sampler and a sampler. The automatic sampler uniformly delivers the sample to the eccentric sampling funnel at a constant speed. The sampling funnel introduces the sample into the rotating porous funnel, and then the centrifugal force and gravity generated by the rotation of the porous funnel distribute the sample into the sample bottle. The entire sampling process is automatically carried out without any interference. The porous funnel with the top of the sample divider rotates at a constant speed of 110/minute per revolution. It can be understood as follows: if an 8-hole sampling top is used, it can be understood as the effect of dividing 880 samples per minute. If 10 sampling crowns are used, the effect is 1100 per sample. The rotation speed is monitored by the controller and is not affected by load and voltage changes. The instrument always samples at a constant speed during operation. Due to the different purposes of sample collection, we provide a variety of adaptable top caps and sample bottles with different volumes for you to choose from. characteristic: 1. The instrument sampling funnel is treated with anodizing, forming a hard protective film on the surface to resist wear. 2. The sampler and automatic sample feeder adopt dual constant speed operation, synchronously processing sample delivery and sampling. Improved sample accuracy. 3. Easy to operate, simple and fast. Quick fastening and disassembly of sample bottles, easy to clean. 4. No noise during work, compact design. 5. The speed of the sampler and sample delivery is monitored by the controller module to maintain equal and constant operation Technical parameters: Power supply: 220V 50HZ 50W Speed: 90-110 revolutions per minute Maximum injection size: 10mm Time setting range: 1-99.99 minutes Samples available: 6, 8, 10 Maximum sample size: 5000 milliliters Receiving sample bottle volumes: 100, 250, 500ml Instrument size: 50 * 40 * 89 centimeters Net weight: 30k
Introduction: The rotary sampler is composed of two main parts: an automatic sampler and a sampler. The automatic sampler uniformly delivers the sample to the eccentric sampling funnel at a constant speed. The sampling funnel introduces the sample into the rotating porous funnel, and then the centrifugal force and gravity generated by the rotation of the porous funnel distribute the sample into the sample bottle. The entire sampling process is automatically carried out without any interference. The porous funnel with the top of the sample divider rotates at a constant speed of 110/minute per revolution. It can be understood as follows: if an 8-hole sampling top is used, it can be understood as the effect of dividing 880 samples per minute. If 10 sampling crowns are used, the effect is 1100 per sample. The rotation speed is monitored by the controller and is not affected by load and voltage changes. The instrument always samples at a constant speed during operation. Due to the different purposes of sample collection, we provide a variety of adaptable top caps and sample bottles with different volumes for you to choose from.
