AL-900 Series Differential Pressure Air Leak Tester
Introduction: The AL-900 series differential pressure air leak tester is a high-precision leak tester created by GTI's more than 30 years of experience and technology accumulation in the leak tester industry. The design of the new air path structure and the optimization of the software algorithm greatly improve the test efficiency and test accuracy, and can easily meet various complex air tightness test requirements. Calibration, scanning, communication, data management and other functions are all available, and it is a high-end leak test instrument that is perfectly integrated with modern smart factories. Features: 1. 5.6" full touch color LCD screen, clear operation interface 2. Integrated high precision, small volume differential pressure sensor 3. Built-in self-developed intelligent test valve island components, long life and good stability 4. RS232/485, network port and other communication interfaces (support Modbus) 5. Configure the scanning interface, which can realize data management and quality traceability 6. Leakage units are available in Pa, mL/min, Pa/s, sccm 7. 100,000 sets of data storage, which can be viewed and exported via USB 8. Multi-level user management authority (up to 10 groups of user names can be added) Technical parameter: Differential pressure Accuracy: ±0.5%FS Display range: ±999Pa Resolution: 0.1Pa or 0.001mL/min Sensor pressure: 2MPa testing time Setting range: 0~999.9s (delay, pressurization, balance, detection, exhaust) Resolution: 0.1s Test pressure unit: kPa, psi, mbar, mmHg Leak value unit: Pa, mL/min, Pa/s, sccm Pilot pressure: 400~600kPa clean, dry, non-corrosive gas Interface display: standard, statistics, curve three modes are optional Input terminal: 7 channels Output terminals: 8 channels, DC24V, 4-20mA optional Communication method: RJ45 network port, RS232/RS485 (baud rate can be set) Scan code function: Support connection with code scan gun to achieve quality traceability Calibration function: External calibration interface Clearing function: Eliminate errors caused by temperature, deformation, etc. of test parts User management: You can add three permissions of administrator, engineer and operator Weight: about 10kg Working temperature: 5~40℃ Relative humidity: ≤85%RH (no condensation) Air source: stable, clean, dry, free of corrosive gases Power supply: AC100~240V±10% 50Hz Dimensions: 250mm×193mm×409mm(W×H×D)
Introduction: The AL-900 series differential pressure air leak tester is a high-precision leak tester created by GTI's more than 30 years of experience and technology accumulation in the leak tester industry. The design of the new air path structure and the optimization of the software algorithm greatly improve the test efficiency and test accuracy, and can easily meet various complex air tightness test requirements. Calibration, scanning, communication, data management and other functions are all available, and it is a high-end leak test instrument that is perfectly integrated with modern smart factories.
