AKF-V1II Capacity Karl Fischer Moisture Analyzer Introduction: The AKF-V1 (2024 version) volumetric Karl Fischer moisture analyzer is a volumetric Karl Fischer moisture analyzer produced by our company with independent intellectual property rights. The instrument adopts new mechanical and electronic design technology and user-friendly interface design, with reliable quality, wide measurement range (0.001-100.00%), high measurement accuracy, and economic practicality. It can be used to accurately analyze crystalline water, adsorbed water, and free water in solid, liquid, and gas samples. characteristic: 1. Apply a constant voltage on the dual platinum electrodes and indicate the titration endpoint by collecting current signals 2. Fully enclosed system, titration cups, solvent bottles, and reagent bottles are all equipped with drying tubes to prevent the infiltration of environmental moisture 3. The instrument can be operated with buttons to achieve: cleaning of measuring tubes, quantitative liquid feeding, solvent suction, waste liquid discharge, and automatic titration 4. The status light indicates whether the instrument is working and ready, the titration curve is dynamically displayed, and the calibration, sample measurement, and verification results are automatically saved 5. During idle time, it will automatically track the drift of environmental moisture and select drift deduction when calculating results to ensure accurate analysis results 6. It can automatically replace fresh solvents, reagents, and discharge waste liquids, and the enclosed structure can reduce the escape of volatile gases from reagents and solvents 7. During the titration process, the feed rate is automatically adjusted based on the water content in the titration cup, and the feed volume, feed rate, and electrode signal are displayed in real-time 8. It has user permission management and supports language switching between Chinese and English 9. The instrument runs smoothly with low noise Technical parameters: Measurement range: 0.001%~100% (10ppm~100%) Repeatability of water titration: RSD ≤ 0.5% Linear correlation coefficient of water titration: ≥ 0.998 Polarization voltage adjustable range: 0-120mV Sampling current accuracy: 0.1uA Storage quantity: 12 users, 5 methods, 100 sample records Power supply: 110-240V/50HZ power supply, 24V adapter, 72W Host weight: 5Kg Installation space W * L * H: 450mm * 400mm * 400mm (including pipelines and three hole bottle rack)
Introduction: The AKF-V1 (2024 version) volumetric Karl Fischer moisture analyzer is a volumetric Karl Fischer moisture analyzer produced by our company with independent intellectual property rights. The instrument adopts new mechanical and electronic design technology and user-friendly interface design, with reliable quality, wide measurement range (0.001-100.00%), high measurement accuracy, and economic practicality. It can be used to accurately analyze crystalline water, adsorbed water, and free water in solid, liquid, and gas samples.
