Introduction: It cleans various glass, quartz, PFA, PTFE, TFM and other vials, utensils and ICP/MS accessories. When loading and unloading the cleaned utensils, the robotic arm will automatically send the acid steam cleaning tray to the corresponding position. When performing acid steaming, the mechanical arm automatically drops the acid steaming cleaning plate back onto the acid pool, and the quartz chamber door is automatically sealed, automatically opened, automatically exhausted, and operated visually. Cleaning principle: Ultra-pure acid vapor cleans the inner surface of the container through the steam pipe; the distilled acid vapor continues to flow in the closed cavity to thoroughly clean any metal contaminants on the container. The advantage is that the trace amount of the acid used for cleaning The metal contaminants remain in the liquid acid and will not touch the cleaned container. Features: 1. Adopt PTFE coating technology to effectively prevent acid corrosion. 2. It has an automatic forced negative pressure exhaust device, which can be connected to an external exhaust pipe to automatically exhaust excess acid gas into the ventilation system. It can be used alone without putting it in a fume hood. 3. The cleaning tray has a steam recirculation tank to increase the steam recirculation speed and shorten the cleaning time. 4. More environmentally friendly acid vapor absorption accessories can be selected, no need to put in the ventilation place or connect the ventilation pipe. 5. Built-in automatic acid adding and discharging system. 6. Pressure safety guarantee. There are three steam filtering breathing holes on the top of the cavity to provide guarantee for internal and external pressure balance. Technical parameter: System equipment: ultra-pure quartz cavity and accessories, fully enclosed system, acid gas injection cleaning method, the length of the acid gas pipe can be customized freely, and cleaned utensils are cooled in a fully enclosed cleaning system to ensure that they are not polluted by air. Nor will they be exposed to acid vapor. Temperature control method: Automatic temperature control, the cleaning temperature can be adjusted from room temperature to 280 degrees. Program storage: 10 programs are arbitrarily selected; the external terminal controller can remotely control the instrument, the built-in application program can be selected or a new program can be created and stored, the cleaning methods of various utensils can be set, and the three-stage heating can be used to clean more complex utensils. . Cleaning quantity: 49 or 30 digits (the number of digits can be customized for special cleaning quantity). Conventional cleaning time: less than 1 hour (the cleaning time can be adjusted according to different residue levels). Cleanliness: It can meet the cleaning requirements of trace and ultra-trace analysis. Acid consumption: 500ml Working voltage: 220VAC±10% Size: 48D*50W*108H cm Humidity: Humidity: 20%--80%
Introduction: It cleans various glass, quartz, PFA, PTFE, TFM and other vials, utensils and ICP/MS accessories. When loading and unloading the cleaned utensils, the robotic arm will automatically send the acid steam cleaning tray to the corresponding position. When performing acid steaming, the mechanical arm automatically drops the acid steaming cleaning plate back onto the acid pool, and the quartz chamber door is automatically sealed, automatically opened, automatically exhausted, and operated visually. Cleaning principle: Ultra-pure acid vapor cleans the inner surface of the container through the steam pipe; the distilled acid vapor continues to flow in the closed cavity to thoroughly clean any metal contaminants on the container. The advantage is that the trace amount of the acid used for cleaning The metal contaminants remain in the liquid acid and will not touch the cleaned container.
