Introduction: Impeller anemometers are widely used in data collection in boilers, refrigeration, HVAC, ventilation pipes, environmental monitoring, and nautical surveys, as well as data collection in weather forecasts, field operations, and firefighting departments. Features: 1. Multi-measurement unit conversion. 2. With maximum hold function. 3. With storage function, 24 groups of data can be stored. 4. High sensitivity and precise measurement, the sensor adopts ultra-low friction bearing. 5. The wind speed measuring handle can be separated from the fuselage for convenient measurement. 6. Not only can measure wind speed, but also measure wind temperature, wave height, wind level and wind volume, etc. 7. The automatic shutdown function can be set by itself (0~9 minutes adjustable). 8. Use USB data cable to output and communicate with PC. 9. In addition, an optional configuration Bluetooth data output option is provided. Technical Parameters: Unit of measurement: Flow rate: CMM (m3/min); CFM (ft3/min) Wind level: Beaufort wind level Wave height: meters Temperature: ℃ & ℉ Data retention: maximum Memory: 24 groups Sampling rate: about 1 second Sensor: Wind speed/flow: low friction bearing impeller Temperature: thermal resistance Automatic shutdown: arbitrarily set between 0-9 minutes Operating temperature: -10℃ ~ 50℃ (14℉ ~ 122℉) Operating humidity: Max 80%RH Power supply: 4x1.5vAAA 7# battery Size: Host: 140x70x30mm Impeller: 72mm in diameter Weight: about 195 grams, including sensor
Introduction: Impeller anemometers are widely used in data collection in boilers, refrigeration, HVAC, ventilation pipes, environmental monitoring, and nautical surveys, as well as data collection in weather forecasts, field operations, and firefighting departments.
